Contract Manufacturing: Meaning, Types & GST in India
6 min read
By
TranZact Solutions Team
· Published


What is contract manufacturing?
Contract manufacturing is when one company (the brand owner) pays another company (the contract manufacturer) to make its parts or finished products. The work follows the brand owner's design and specifications. The brand owner keeps the design and sells the product; the contract manufacturer runs the factory. In India, if the brand owner sends its own material to be processed, GST treats it as job work. Inputs must come back within one year (capital goods within three years).
For example, a two-wheeler brand needs brackets for its bikes. A machine shop in Pune makes them to the brand's drawing, and the brand fits them on its assembly line.
That machine shop is a contract manufacturer. So is a chemical plant that blends a product for another brand. So is a food plant that packs goods under a retailer's label.
Types of contract manufacturing
Component manufacturing: the contractor makes one part, like a casting or a moulded cover. You assemble it.
Full product or private label: the contractor makes the finished product, ready for your label.
Labour or process-only: you send the material and the contractor does one process, such as plating or heat treatment. Under GST, this is usually job work.
Turnkey or end-to-end: the contractor buys the material, makes the product and packs it.
Contract manufacturing vs job work under GST
For GST, the question is simple: who owns the material? Under Section 2(68) of the CGST Act, job work is a process done on goods belonging to another registered person.
If the contractor buys the raw material and sells you finished goods, that is contract manufacturing. If you send your own material and the contractor processes it, that is job work.
Under Section 143, a registered principal can send inputs or capital goods to a job worker without paying tax. The goods move on a delivery challan. The one-year and three-year return limits above apply.
Miss those limits, and the goods are treated as supplied on the date they first left your factory. Moulds, dies, jigs, fixtures and tools are excluded from this limit. You also file ITC-04: half-yearly if last year's turnover was above ₹5 crore, otherwise once a year.
Point | Contract manufacturing | Job work |
|---|---|---|
Who owns the material | The contractor | You (the principal) |
What the contractor bills | Finished goods, on a tax invoice | Its processing charge |
Time limit to return goods | Not applicable, it is a sale | 1 year for inputs, 3 years for capital goods |
ITC-04 filing | Not needed | Yearly or half-yearly |
GST rules change, so confirm the details for your case with your CA. Our guide on tracking job work material and filing ITC-04 covers the return in more detail.
Where contract manufacturing breaks in a factory
The deal is rarely the problem. The tracking is. Most manufacturers run contractors on Excel, WhatsApp and memory, and that patchwork leaves gaps:
No record of stock at the contractor. Nobody knows how much of your material sits at each vendor without a phone call.
Short returns. Material goes out, less comes back, and nobody can say if the loss is within the agreed limit.
Late jobs. Delays show up only when the assembly line runs short.
Bills not tied to the job. The contractor's invoice arrives, but no one can match it to what was sent and received.
Unknown cost per piece. Material, processing charge, freight both ways and loss are never added up per job.
None of this is your team's fault. Excel and WhatsApp were never built to track material sitting outside your plant.
Tracking contractors: patchwork vs TranZact
Excel + WhatsApp | TranZact | |
|---|---|---|
Stock at contractor | Phone call to check | Multi-store inventory |
Contractor jobs | WhatsApp follow-ups | Work orders and routing |
Cost per piece | Worked out later | Production costing |
Dispatch papers | Typed separately | E-way bill from GST invoice |
Accounts | Re-typed in Tally | One-way Tally sync |
How TranZact runs sub-contracting for a manufacturer
TranZact is manufacturing AI software used by 10,000+ manufacturers. It runs sub-contracting inside your production flow, not on a separate sheet.
Production: multi-level BOM, work orders, process routing, sub-contracting and production costing. See production management.
Inventory: stock in, issue, bin card, multi-store, reorder and AI stock alerts. See inventory management.
Purchase: MRP report → indent → RFQ → PO → GRN → payment, for the material your contractors need.
Dispatch: the e-way bill is generated from the GST invoice, with e-invoice (IRN) in the same flow, on all plans. More in our e-way bill guide.
Accounts: accounting stays in Tally, Busy or Zoho Books, with one-way sync and no double entry.
TranZact's AI also turns a photo of a paper entry into a system entry, with no typing. Supplier invoices match to POs automatically.
Routing, sub-contracting and production costing are in the Grow plan, at ₹8,333/month billed yearly for 4 users. See pricing for Scale+ and Dominate. Live in 2–3 weeks.
One honest limit: TranZact does not negotiate turnaround times or prices with your vendors. That stays with you. For more on running vendors, read our subcontracting guide.
How contract manufacturing works, step by step
Most contract manufacturing jobs follow the same five steps, from quote to payment.
How a contract manufacturing job runs
Agree specs, price and terms
Buy or issue the material
Contractor makes the parts
Count, check and record returns
Match the bill, then pay
The return is where gaps open up. Count every piece, check quality and record process loss against the job before you pay the bill.
What to put in a contract manufacturing agreement
A clear agreement prevents most disputes. Cover at least these points:
Specs, drawings and the quality checks each lot must pass
Price per piece, quantity and delivery dates
Material loss allowance: how much scrap or process loss is acceptable
IP ownership and an NDA covering your drawings
Who owns the tooling, moulds and dies
Advantages and risks of contract manufacturing
Advantages: you get equipment and skills without buying them, lower overheads and faster launches. Your team can focus on design and sales.
Risks: you lose some control over quality and timing, and weak IP terms can leak your drawings. Your job may wait behind a bigger customer's order. The contractor's margin raises your cost, and one contractor means one point of failure.
Other names for contract manufacturing
The same idea goes by several names, depending on the industry:
Third-party manufacturing: used in India for the same arrangement.
CMO: contract manufacturing organisation, the usual term in pharma.
Copacker: a contract manufacturer for packaging.
Foundry: the term used in semiconductors.
OEM vs contract manufacturer vs ODM
The difference is who owns the design. An OEM sells the product under its own brand. A contract manufacturer makes it to the OEM's design, and the client usually keeps the IP.
An ODM (original design manufacturer) owns the base design, and brands sell products built on it. Either way, the agreement must say who owns the IP, tooling and changes.
CMO vs CDMO
A contract manufacturing organisation (CMO) makes products for other brands. It provides manufacturing services only.
A CDMO (contract development and manufacturing organisation) also develops the product. That includes process optimisation and scale-up. Both terms are common in pharma and chemicals.
Track every contractor on one system
If your material is spread across contractors and tracked on WhatsApp, see how it looks on one system. Don't be the bottleneck. Become the AI-Run Factory.




