FIFO and LIFO: Meaning, Example & Which India Allows
6 min read
By
TranZact Solutions Team
· Published


FIFO and LIFO in one minute
FIFO (first in, first out) values stock as if the oldest units are used or sold first. LIFO (last in, first out) assumes the newest units go first. When prices rise, FIFO gives a lower cost of goods sold, higher profit and higher closing stock, and LIFO does the opposite. In India, LIFO is not allowed under AS 2, Ind AS 2 or ICDS II, so manufacturers use FIFO or weighted average cost.
Weighted average cost is the third method. It values every unit at the average cost of all the units you hold.
What FIFO means (first in, first out)
Under FIFO, the cost of your oldest purchase goes out first. When MS sheet is issued to production, the books charge the earliest purchase price first.
What remains at year end carries the newest prices. So your closing stock value stays close to what it would cost to buy today.
What LIFO means (last in, first out)
Under LIFO, the cost of your latest purchase goes out first. Cost of goods sold then tracks current prices.
The flip side is closing stock. It carries the oldest prices, which can be years out of date. That gap is a big reason IFRS dropped LIFO, as we explain below.
FIFO vs LIFO vs weighted average: a ₹ example
Take one raw material, MS sheet, over one month. The numbers below are illustrative.
Opening stock on 1 April: 1,000 kg at ₹60/kg = ₹60,000
Purchase on 10 April: 1,000 kg at ₹65/kg = ₹65,000
Purchase on 20 April: 1,000 kg at ₹70/kg = ₹70,000
Issued to production on 30 April: 2,000 kg
You held 3,000 kg costing ₹1,95,000 in total. After the issue, 1,000 kg is left. Each method splits the ₹1,95,000 differently.
FIFO: the 2,000 kg issued come from the two oldest lots. That is 1,000 kg at ₹60 plus 1,000 kg at ₹65, or ₹1,25,000. The 1,000 kg left is valued at ₹70, so ₹70,000.
LIFO: the issue comes from the two newest lots. That is 1,000 kg at ₹70 plus 1,000 kg at ₹65, or ₹1,35,000. The 1,000 kg left is valued at ₹60, so ₹60,000.
Weighted average: divide total cost by total quantity. ₹1,95,000 ÷ 3,000 kg = ₹65/kg. The issue costs ₹1,30,000 and the stock left is worth ₹65,000.
Method | Cost of 2,000 kg issued | Value of 1,000 kg left | Allowed in India? |
|---|---|---|---|
FIFO | ₹1,25,000 | ₹70,000 | Yes |
Weighted average | ₹1,30,000 | ₹65,000 | Yes |
LIFO | ₹1,35,000 | ₹60,000 | No |
Every method adds up to the same ₹1,95,000. Only the split between cost and closing stock changes.
If you issue material through the month, the average is worked out again after each purchase. That is called a moving average.
How to work out FIFO closing stock
List lots from oldest to newest
Take each issue from the oldest lot
Value what's left at its lot cost
Match the quantity to a physical count
FIFO in the store, not just in the books
FIFO valuation is a rule in your books. Physical FIFO is a stores habit: issue the oldest batch or GRN first.
The two are separate. You can value stock at weighted average and still issue the oldest batch first. Many factories do exactly that.
Physical FIFO matters most for items that expire, rust, harden or go out of spec. When old lots sit at the back, they age into slow-moving or dead stock. Then the year-end count throws up write-offs nobody saw coming.
To issue oldest first, the store needs to know which lot is oldest and where it sits. That is hard to see on paper bin cards and an Excel sheet updated days late.
Where TranZact fits
Your cost formula is a call for you and your CA. TranZact handles the stock data underneath it. It is manufacturing AI software used by 10,000+ manufacturers.
In TranZact's inventory module, stock in, issue and bin card entries sit on one system, across multiple stores. A photo of a paper entry becomes a system entry, so consumption gets recorded the moment it happens.
Stock tracking and inventory ageing & valuation come with the Grow plan and above.
Batch-wise stock tracking comes with Scale+ and above. Batch Tracking & QC is on Dominate.
Reorder and AI stock alerts are part of the same inventory module.
Accounts stay in Tally. Operations run in TranZact, with one-way sync and no double entry. Busy and Zoho Books sync too. See how the TranZact–Tally integration works.
One limit to know: TranZact does not set your valuation policy or replace your accounts. Plans and prices are on the pricing page, and TranZact goes live in 2–3 weeks.
Which gives higher profit and tax when prices rise
In the example, LIFO charged ₹10,000 more to cost than FIFO. So LIFO shows ₹10,000 less profit, and less tax on that profit.
FIFO does the reverse when prices rise. Cost is lower, profit is higher, and closing stock is higher on the balance sheet. When prices fall, the effects flip.
Weighted average lands in between. It smooths the swings from month to month.
So which is better, FIFO or LIFO?
For an Indian manufacturer, the question is settled: LIFO is not an option. The real choice is FIFO or weighted average. Outside India, LIFO mainly appeals to US companies that want lower taxable profit when prices rise.
Is LIFO allowed in India?
No. AS 2 and Ind AS 2 allow two cost formulas: FIFO and weighted average cost. Items that are not interchangeable, like goods made for one project, use specific identification instead.
ICDS II, which applies when you compute income for tax, follows the same list. LIFO is not on it. So you can't use LIFO in your books or your tax return.
Why is LIFO not allowed under IFRS?
IFRS removed LIFO from its stock standard, IAS 2. LIFO rarely matches how goods physically move. It can also leave closing stock at prices from many years ago.
Ind AS 2 follows IFRS, so India takes the same line. LIFO is still allowed under US GAAP.
FIFO vs weighted average: which should a manufacturer pick
Both are legal, so pick the one that fits how your materials behave.
Prices change every month (steel, polymer, copper): weighted average evens out the swings in your costing.
Batch or expiry items (pharma, food, chemicals): FIFO matches how you should issue that stock anyway.
You want closing stock near today's prices: FIFO does that.
Consistency: use one formula for stock of a similar nature and use, and disclose it in your accounts.
Can a company change from FIFO to weighted average?
Yes, but not casually. A change needs a good reason, such as giving a fairer picture of your stock. You must disclose the change and its effect on profit. Check with your CA before you switch.
Year-end stock valuation checklist
Pick FIFO or weighted average
Use it for all similar items
Match system stock to a physical count
Flag aged and slow-moving stock
Disclose the method in your accounts
Bottom line
LIFO is out in India, so choose FIFO or weighted average and stay with it. Then make sure the stock you value matches the stock on your floor. Ask us to show ageing and valuation with your own items.
Don't be the bottleneck. Become the AI-Run Factory.




