Procurement Process: 8 Steps for Manufacturers (India)
7 min read
By
TranZact Solutions Team
· Published


The procurement process is the set of steps a business follows to buy goods or services from suppliers. You find the need, raise a request and get it approved. Then you choose a vendor, place a purchase order, receive and check the goods, match the invoice, and pay. In a factory, the need comes from sales orders and the bill of materials. So buying the right quantity at the right time keeps production running without locking cash in extra stock.
What is the procurement process?
Procurement is how raw material, parts, packing material and services reach your shop floor. It covers everything from spotting the need to paying the vendor.
For a manufacturer, it matters in two ways. Buy too little and the line stops, waiting for one part. Buy too much and cash sits on the shelf as stock.
The 8 steps of the procurement process
Many purchasing guides list five to seven steps. A manufacturer needs eight, because receiving and checking material deserves its own step.
1. Find the need
Start from confirmed sales orders, the bill of materials (BOM) and current stock. Planning or stores works out what is short. Guessing from what looks low on the shelf causes both stockouts and overbuying. An MRP report does this sum for every item.
2. Raise an indent (purchase requisition)
An indent is the Indian name for a purchase requisition (PR). Stores or production raises it to ask purchase for material. It lists the item, quantity, needed-by date and reason. Without it, orders get placed on a phone call, and nobody knows why later.
3. Get approval
Someone signs off before money is committed. Set a simple rule, such as purchase head up to a set amount and owner above it. Write the limit down. The common failure is no trail, so nobody can tell who approved a costly order.
4. Ask for quotes (RFQ) and choose the vendor
Purchase sends a request for quotation (RFQ) to two or three vendors. Compare price, lead time, payment terms and past quality. The usual mistake is buying from the same vendor by habit, without checking the market.
5. Issue the purchase order (PO)
The PO is your commitment to the vendor. It states items, rate, quantity, delivery date, GST and payment terms. A vague PO causes disputes when the bill arrives. Our purchase order format guide lists the fields to include.
6. Receive and check the goods
Stores counts the material against the PO and records a goods receipt note (GRN). Quality checks it where needed. Note short supply, excess supply and part deliveries on the GRN. If nobody checks, you pay for material that never arrived.
7. Match the invoice
Accounts compares the PO, the GRN and the vendor invoice before paying. This is called a three-way match. Quantity, rate and GST should agree on all three. Any gap goes back to the vendor as a query or a debit note.
8. Pay the vendor and keep the records
Pay as per the agreed terms and close the PO. Keep notes on each vendor's delivery time, rejections and price changes. Next time you run an RFQ, this history helps you choose.
Where the procurement process breaks in a small factory
Most small manufacturers know these steps. The process still breaks in the same five places.
No indent. Material is ordered on a phone call or WhatsApp, with no written request.
No approval trail. Nobody can say who agreed to a large order, or at what rate.
Same vendor by habit. No RFQ, so prices and lead times are never compared.
GRN not matched to the PO. Short supply gets paid in full.
Purchase can't see the production plan. It buys late for urgent jobs and early for slow ones.
The fault isn't the team. Tally, Excel and WhatsApp were never built to connect these steps, so the owner ends up connecting them.
How TranZact runs the procurement process for a manufacturer
TranZact is manufacturing AI software used by 10,000+ manufacturers. Its purchase flow follows the same steps: MRP report → indent → RFQ → PO → GRN → payment.
Need: The MRP engine runs through your orders and BOMs, then tells you what to buy and when.
Indent and approval: The indent follows the MRP report, with approvals & alerts on every plan.
RFQ and PO: Your team sends RFQs and raises POs in the same flow, with vendor coordination built in.
GRN: Stores records what arrived. A photo of a paper entry becomes a system entry, with no typing.
Invoice match: TranZact's AI reads supplier invoices and matches them to the POs they belong to.
Job work: Sub-contracting is built in for material sent to job workers.
Accounts: Accounting stays in Tally, Busy or Zoho Books. Data syncs one way, with no double entry.
On the sales side, TranZact generates the e-way bill from the GST invoice, with e-invoice (IRN) in the same flow. See the full purchase management flow.
Plan note: Planning (MRP + indent), approvals & alerts and sub-contracting are on Grow, Scale+ and Dominate. Batch-wise stock tracking starts at Scale+. Quality control for incoming raw material is on Dominate only. Check pricing for each plan. TranZact goes live in 2–3 weeks.
Procurement process flow chart
The full flow in one line: Need → Indent → Approval → RFQ → PO → GRN → Invoice match → Payment.
Procurement process flow: need to payment
Need found from orders and BOM
Indent raised and approved
RFQ sent, vendor chosen
PO issued, goods received on GRN
Invoice matched, vendor paid
Procurement process documents at a glance
Document | Who raises it | What it records | What goes wrong |
|---|---|---|---|
Indent (PR) | Stores or production | Item, quantity, needed-by date, reason | Skipped; order placed by phone |
RFQ | Purchase | Items and quantities asked from 2–3 vendors | Sent to one vendor only |
Purchase order | Purchase, after approval | Rate, quantity, delivery date, terms | Rate or terms left vague |
GRN | Stores | Quantity received, accepted and rejected | Not matched to the PO |
Vendor invoice | Vendor | Billed quantity, rate, GST | Paid without checking the GRN |
Buying on the patchwork vs with TranZact
Tally, Excel and WhatsApp | With TranZact | |
|---|---|---|
What to buy | Guess from the shelf | MRP report from orders and BOMs |
Request | Phone call or WhatsApp | Indent |
Paper entries | Retyped later, or never | Photo becomes a system entry |
Vendor invoice | Checked by hand | Matched to its PO |
Accounts | Re-entered in Tally | One-way sync to Tally |
PR and PO: what's the difference?
A purchase requisition (PR), or indent, is an internal request. It asks purchase to buy something and commits no money. A purchase order (PO) goes to the vendor. Once accepted, it commits you to buy at the stated rate and terms. The PR and PO process is simple: indent raised, approved, then turned into a PO.
Procurement vs purchasing (and procure-to-pay)
Procurement is the whole cycle, including finding vendors, comparing quotes and agreeing contracts. Purchasing is the narrower part: placing orders and following them up. Procure-to-pay (P2P) means the cycle from indent through to vendor payment.
Where procurement planning fits
Procurement planning comes before step 1. It decides what to buy, how much and when, based on expected demand. Our procurement planning guide covers it in full.
Procurement and supply chain management
Supply chain management covers the whole path from supplier to customer: buying, making, storing and delivering. Procurement is the buying part. If it slips, everything after it waits.
Contract management and the 5 pillars of procurement
Contract management means agreeing terms with key vendors and checking they are kept. Think rate contracts, delivery schedules and quality terms.
There is no single fixed list of the 5 pillars of procurement, and sources list them differently. Common themes are cost, quality, supplier relationships, control and compliance, and risk.
Run indent to payment in one system
Don't be the bottleneck. Become the AI-Run Factory. Book a call and see your own items move from MRP report to GRN.




