Quality Assurance: Meaning, Process & Steps for Factories
6 min read
By
TranZact Solutions Team
· Published


Quality assurance (QA) is the set of planned steps a business follows so its products meet the agreed quality every time. It prevents defects by fixing the process, while quality control (QC) checks the output to catch defects. In a factory, QA covers approved suppliers, raw material checks at receipt, written process standards, in-process checks and final inspection records.
This guide explains QA in plain words for Indian manufacturers. It covers QA vs QC, a six-step QA process for manufacturers, and how to keep records you can trace.
What is quality assurance?
In simple words, quality assurance means doing the right things in the right order, so good parts come out every time. You decide what "good" means, then build checks into buying, making and dispatching.
ISO 9000:2015 gives the formal definition. It calls QA the "part of quality management focused on providing confidence that quality requirements will be fulfilled". That confidence comes from written standards and records, not from one supervisor's memory.
Quality assurance vs quality control
QA prevents defects. QC finds them. QA works on the process: specs, supplier approval, training and procedures. QC works on the product: measuring, testing, and accepting or rejecting what was made.
Point | Quality assurance (QA) | Quality control (QC) |
|---|---|---|
Goal | Prevent defects | Detect defects |
Focus | The process | The product |
When | Before and during production | At receipt, in process and before dispatch |
Typical work | Specs, supplier approval, audits, training | Inspection, testing, accept or reject |
Example | Writing the check plan for a new part | Measuring the part against that plan |
A manufacturer needs both. QC without QA means you keep catching the same defect. QA without QC means you never know if the process works.
Quality assurance process: 6 steps for a manufacturer
Set specs for each item. Write the tolerance, test and acceptance limit for every raw material and finished part. Attach the drawing or spec sheet.
Approve suppliers. Buy critical items only from vendors who passed a trial lot. Rate them on rejections and delivery, as in our vendor rating method.
Check raw material at GRN. Inspect or test each lot before it goes into the store. Record the result against the goods receipt note.
Run in-process checks at each routing step. Check after the steps where defects start, such as machining, mixing or moulding. Record who checked and what they found.
Check finished goods before dispatch. Inspect against the customer's spec. Hold any lot that fails until someone decides rework or scrap.
Record, review and fix the cause. Log every rejection against the batch and supplier. Review them each month and fix the process, not just the part.
What every QA record should link to
Batch or lot number
Supplier and GRN
Work order and routing step
Who checked, and when
Result and action taken
Where paper QA breaks
Most manufacturers start QA on paper registers and Excel. The checks get done. The trouble starts when you need to link them later.
Checks are not tied to the batch. When a customer complains, someone searches registers by hand to find the lot.
Records get rebuilt before audits. Missing entries are filled in days later, which defeats the purpose.
Rejections are not linked to the supplier. Purchase keeps buying from a vendor whose lots keep failing, because nobody sees the pattern.
The fault is the patchwork, not the team. A paper register cannot connect a check to the GRN, the batch and the dispatch.
How TranZact records quality checks for a manufacturer
TranZact is manufacturing AI software that runs a factory from enquiry to dispatch. 10,000+ manufacturers use it. For QA, what matters is that checks sit in the same system as purchases, stock and production.
The purchase flow runs MRP report → indent → RFQ → PO → GRN → payment. Production covers multi-level BOM, work orders, process routing, sub-contracting and production costing.
The Dominate plan adds Raw Material QC and Finished Good QC. Dominate costs ₹30,000/month billed yearly, with 12 users. Compare every plan on our pricing page.
Here are the limits, plainly. Grow and Scale+ do not include QC. Batch-wise stock tracking starts on Scale+, at ₹16,666/month billed yearly with 8 users.
TranZact's AI reads a photo of a paper entry and turns it into a system entry. Accounts stay in Tally, with a one-way sync. TranZact goes live in 2–3 weeks.
Types of quality assurance in a factory
Incoming (supplier) QA: approve suppliers and check raw material when it arrives.
In-process QA: check parts at set stages of production, against the drawing or spec.
Final (pre-dispatch) QA: inspect finished goods before dispatch.
System QA (audits): internal and customer audits that confirm procedures are followed.
Quality assurance examples by industry
Auto parts: check critical dimensions on the first piece and during the run, against the drawing.
Pharma: keep batch manufacturing records and release each batch only after QA review.
Food processing: check incoming ingredients and record batch codes, so a recall can be traced.
Plastic moulding: check first-off parts after every mould change and record the result.
Paper QA vs records tied to the batch
Paper registers and Excel | Records tied to the batch |
|---|---|
Tracing a complaint by hand | Open the batch record |
Audit prep means rebuilding files | Records already linked |
Supplier rejections scattered | Rejections linked to the supplier |
Checks entered days later | Checks logged when done |
Main quality assurance methods
Failure testing: push a product until it fails, to find weak points before a customer does.
Statistical process control (SPC): measure samples during production and plot them, to spot drift before parts go out of tolerance.
Total quality management (TQM): make quality every team member's job, from purchase to dispatch.
The 7 quality management principles
ISO 9001 is built on seven quality management principles, set out in ISO 9000:
Customer focus
Leadership
Engagement of people
Process approach
Improvement
Evidence-based decision making
Relationship management
On a shop floor, "evidence-based" simply means decisions come from check records, not opinions.
What the QA team does in a manufacturing company
In most MSMEs, QA is one or two team members, often led by the QC head. Their work usually covers:
Writing specs, inspection plans and procedures.
Approving new suppliers and reviewing their rejections.
Running internal audits and preparing for customer or ISO audits.
Reviewing rejections and complaints, finding the cause and agreeing the fix.
Training operators on the checks they own.
If you are comparing tools for this work, our quality control software buying guide lists what to check.
Don't be the bottleneck
Good QA should not depend on the owner checking every register. Don't be the bottleneck. Become the AI-Run Factory. See TranZact run on your own items, suppliers and batches.




