Stock Audit: Meaning, Procedure & Checklist for Factories
6 min read
By
TranZact Solutions Team
· Published


A stock audit is an independent check that the stock you physically hold matches your stock records. It also confirms that you own it and that it is valued correctly. In India, it is most often ordered by a bank when working capital limits exceed ₹5 crore. The bank uses it to confirm the stock behind your drawing power. For a factory, it covers raw material, work-in-progress and finished goods at every store and location.
What is a stock audit?
It covers only inventory, unlike a statutory audit of your whole accounts.
Stock audit vs stock taking vs inventory audit
Stock taking is only the physical count. A stock audit adds a review of your records and an explanation for every difference.
Check | What it covers | Who orders it | What you get |
|---|---|---|---|
Stock taking | Physical count of what is in stores | Your own team | Count sheets |
Stock audit | Count, record review and reasons for differences | Usually a bank | Audit report to the bank |
Inventory audit | The same checks, for your own control | The business owner | Internal report and fixes |
When is a stock audit needed in India?
Bank working capital above ₹5 crore and drawing power
Banks typically ask for a stock audit when working capital limits exceed ₹5 crore. Lender policies vary, so read your sanction letter. The auditor is usually an external CA firm or one on the bank's panel.
The audit tests your drawing power. Drawing power is eligible stock and debtors, less the margins in your sanction letter. If your drawing power is based on a stock statement older than three months, the bank treats the account as irregular.
Statutory audit under CARO 2020
CARO 2020 applies only to companies, not proprietorships, partnerships or LLPs. Clause 3(ii)(b) covers working capital limits above ₹5 crore in total, secured on current assets. Your statutory auditor then reports whether the quarterly statements you file with the bank agree with your books.
Owner-ordered checks
Many MSMEs audit stock for their own control, not because a rule says so.
Stock audit procedure: 8 steps
Pre-audit planning. The auditor fixes the date, locations and items to cover.
Document collection. You share stock statements, stock reports, GRNs, invoices and production records.
Process walkthrough. The auditor sees how material comes in, gets issued, moves through production and leaves.
Physical verification. Stock is counted in each store, on the floor and at outside locations.
Reconciliation. Physical counts are matched to book stock, and each difference is explained.
Valuation testing. The auditor checks your valuation method and looks for obsolete stock.
Drawing power review. For bank audits, eligible stock is compared with your stock statement.
Final report. Findings, variances and remarks go into the stock audit report.
A stock audit report for a factory lists location, date, item, physical count, book count, variance and remarks. The unit in-charge and the auditor both sign it.
What a stock audit checks in a factory
Raw material
Raw material is counted store by store and matched to GRNs and issues. Most gaps come from issues to production that were never entered.
Work-in-progress
Count WIP by stage against open work orders and the BOM, with the cost added so far.
Finished goods
Finished goods are matched to production entries and dispatches. Goods invoiced but not yet shipped need a clear cut-off. Otherwise they show up in both stock and sales.
Stock at job workers and other locations
Stock you own at a job worker's site is still your stock. Keep challans and a location-wise register. Stock at a location you never reported to the bank may not count for drawing power.
Scrap, slow-moving and consignment stock
Scrap and rejected material need their own count and value. Obsolete, unpaid or uninsured stock may be left out of drawing power. Read more on slow-moving inventory.
Stock you hold for someone else is not yours, so keep it separate (see consignment inventory).
How TranZact keeps a factory audit-ready
Most mismatches start with a movement on paper or WhatsApp that never reached the system. TranZact, used by 10,000+ manufacturers, connects every movement that affects stock on one system.
Stock by location: multi-store, stock in, issue and bin card.
GRNs tied to POs: MRP report → indent → RFQ → PO → GRN.
WIP you can support: multi-level BOM, work orders, process routing and production costing.
Valuation and old stock: inventory ageing and valuation, on the Grow plan.
Batches: batch-wise stock tracking from Scale+.
Accounts: accounting stays in Tally, with one-way sync and no double entry.
This manufacturing AI software goes live in 2–3 weeks. See the inventory features and plans.
One honest limit: TranZact doesn't replace your auditor or the audit report. You still need the physical count. What changes is that your records are clean and location-wise when the count starts.
Stock audit checklist: documents to keep ready
Keep these ready before the auditor arrives.
Latest stock statement submitted to the bank
Item-wise and location-wise stock reports
Bin cards for every store
GRNs matched to POs and supplier invoices (use our GRN format)
Production and WIP records against work orders
Dispatch challans and sales invoices
Job-work challans and stock at outside locations
Valuation basis: the method and rates used
Exceptions register: damaged, rejected, slow-moving and consignment stock
The week before your stock audit
Post every pending GRN and issue
Enter dispatches up to count day
Stop stock movement during the count
Confirm stock held by job workers
Tag scrap and consignment stock separately
Common mismatches auditors find and how to fix them
Negative stock. Issues were posted before the receipt was entered. Post each GRN the day material arrives.
Unmatched GRNs. Goods came in with no matching PO or invoice. Match every GRN before month-end.
Cut-off errors. Month-end receipts or dispatches land in the wrong period. Fix one cut-off date and keep to it.
WIP misreporting. WIP is guessed, not counted. Tie it to open work orders.
Consignment stock counted as own. Keep it in a separate store or register.
Missing bin cards. Movements aren't written at the rack. Update the bin card with every in and out.
When a difference can't be explained, correct it with a recorded adjustment. See our guides on stock reconciliation and inventory adjustment.
How often should you audit stock?
For a bank audit, the bank decides through its credit policy and your sanction letter. For your own control, don't rely on one big yearly count.
Run cycle counts every quarter, covering a set of items each time. Add spot checks on high-value items.
Year-end scramble vs audit-ready all year
Year-end scramble | Audit-ready all year | |
|---|---|---|
Counting | Once a year | Quarterly cycle counts |
Bin cards | Filled in before the audit | Updated with every movement |
GRNs | Matched in a rush | Matched before month-end |
WIP | Estimated | Tied to open work orders |
Get ready before the next audit
A stock audit should confirm numbers you already trust. If your stock lives across Tally, Excel and WhatsApp, let us show you every store, audit-ready.
Don't be the bottleneck. Become the AI-Run Factory.




