Types of Inventory: 4 Core Types + 6 More for Factories
6 min read
By
TranZact Solutions Team
· Published


What are the types of inventory?
There are four main types of inventory: raw materials, work-in-progress (WIP), finished goods, and MRO (maintenance, repair and operating) supplies. A factory also holds packing material, safety stock, anticipation (seasonal) stock, cycle stock, in-transit stock and material lying with job workers. In India, inventory is valued at the lower of cost or net realisable value, using FIFO or weighted average cost. LIFO is not allowed under AS 2.
Inventory is every item a business holds to make or sell its products. For a manufacturer, that runs from steel coil in the store to boxed parts waiting for dispatch.
Type | Group | Factory example |
|---|---|---|
Raw materials | Core (stage) | Steel coil, plastic granules |
Work-in-progress | Core (stage) | Machined part waiting for plating |
Finished goods | Core (stage) | Boxed brake drums ready to ship |
MRO supplies | Core (stage) | Cutting oil, spare bearings, gloves |
Packing material | Purpose | Cartons, labels, stretch film |
Safety stock | Purpose | Extra granules for supplier delays |
Anticipation stock | Purpose | Snacks packed ahead of Diwali |
Cycle stock | Purpose | The regular monthly lot of resin |
In-transit stock | Purpose | Coil on a truck from the mill |
Job-worker stock | Purpose | Parts at a plating vendor |
Websites say 3, 4, 5 or 12 types because they count in different ways. Some count only by stage of production. Others mix in types by purpose, like safety or seasonal stock. This page uses 4 core types by stage, plus 6 by purpose.
The 4 core types of inventory (by stage of production)
Raw materials (direct and indirect)
Raw materials are what you buy to turn into your product. Direct raw materials end up in the product, like steel for a gear or resin for a bottle. Indirect ones get used up on the way, like welding rods or adhesive. More in our guide to raw materials inventory.
Work-in-progress (WIP) and semi-finished goods
WIP is material that has left the store but is not a finished product yet. A gear blank after turning, before hobbing, is WIP. See our work-in-process inventory guide.
Semi-finished goods are WIP that sits between stages. They can be stored, and sometimes sold, as they are.
Finished goods
Finished goods are products ready to sell and dispatch. Goods you make and keep in stock for sale are called finished goods. Goods you buy only to resell are called stock-in-trade. Read more in our finished goods guide.
MRO supplies (maintenance, repair and operating)
MRO inventory is the supplies that keep machines and the plant running. They never become part of the product. Think lubricants, spare bearings, V-belts, cutting tools and gloves.
A missing spare bearing can stop a whole line. So MRO deserves its own store and its own reorder levels.
How to track each type in a factory
Give each type its own store or location. Record every withdrawal on an issue slip against a work order. Send every job-work lot with a delivery challan, and log the return against it.
Paper registers and Excel break as volume grows. The stores register, the Excel sheet and Tally each show a different number. WIP goes unseen because nobody logs material between machines.
Job-work stock sits in a challan file until someone chases the vendor on WhatsApp. The fault is the register, not the team. A register only knows what someone wrote in it.
What to check in inventory software
Separate stores for each type
WIP visible by work order
Job-work stock tracked separately
Batch-wise stock if you need it
Reorder levels and stock alerts
Syncs with Tally, no double entry
We compare inventory software for Indian manufacturers in our inventory software buyer's guide.
Where TranZact tracks each type of inventory
TranZact is manufacturing AI software used by 10,000+ manufacturers. Its inventory management keeps each type of stock on one system.
Type of inventory | TranZact feature |
|---|---|
Raw materials | Stock in, GRN, reorder, AI stock alerts |
Work-in-progress | Work orders, process routing, production costing |
Finished goods | Stock tracking, dispatch |
MRO supplies | Issue, multi-store |
Packing material | Multi-level BOM |
Safety stock | Reorder, AI stock alerts |
Anticipation stock | MRP report → indent |
Job-worker stock | Sub-contracting |
Batch-wise stock | Scale+ plan and above |
Valuation and ageing | Inventory ageing & valuation |
The MRP engine runs through your orders and BOMs, then tells you what to buy and when. TranZact has no separate in-transit stock feature, so plan for goods on the road in your own process.
Accounting stays in Tally, with one-way sync and no double entry. Busy and Zoho Books work too. TranZact goes live in 2–3 weeks.
6 more types a factory holds (by purpose)
Packing material
Cartons, labels, pouches and stretch film. Packing material is bought, stored and issued on its own. That is why it is tracked apart from raw material.
Safety stock
Safety stock is extra stock kept to cover late suppliers or sudden orders. A moulder might keep two extra weeks of granules for a far-off supplier. Our stock levels guide shows how to set it.
Anticipation (seasonal) stock
Anticipation inventory is stock you build before an expected rise in demand or price. A snacks plant builds stock before Diwali. A buyer may stock up on copper before a known price rise.
Cycle stock
Cycle stock is the normal stock used up between two regular orders. If you buy resin once a month, that month's lot is cycle stock. More in our cycle inventory guide.
In-transit (pipeline) stock
In-transit stock is material on the road, from a supplier or to a customer. Who owns it depends on your delivery terms. It is easy to miss in a stock count because it sits in no store.
Material lying with job workers
This is material sent out for plating, heat treatment, painting or machining. It is still yours and still part of your stock. Do not mark it as used up when it leaves.
The GST side is covered in our ITC-04 job work guide.
Two ways to group inventory
By stage of production | By purpose | |
|---|---|---|
Question it answers | Where is it in the process? | Why are we holding it? |
Types | Raw, WIP, finished, MRO | Safety, cycle, seasonal, transit |
Mostly used by | Stores and accounts | Purchase and planning |
Example: one auto-parts factory's stock, type by type
Here is an illustrative example of a small maker of machined brackets. It shows types only, with no real quantities.
Item | Where it is | Type |
|---|---|---|
Steel coil | Raw material store | Raw material |
Machined bracket waiting for plating | At the plating job worker | WIP and job-work stock |
Plated, boxed bracket | Finished goods store | Finished goods |
Cutting oil, spare bearings | Maintenance store | MRO |
Cartons and labels | Packing store | Packing material |
One item can sit in two types at once. The bracket at the plater is WIP by stage and job-work stock by location.
How each type of inventory is valued in India
Under AS 2, inventory is carried at the lower of cost and net realisable value (NRV). NRV is the expected selling price, less the cost to finish and sell.
The three common inventory methods are FIFO, LIFO and weighted average. FIFO (first in, first out) costs the oldest stock first. LIFO (last in, first out) costs the newest stock first. Weighted average costs each issue at the average of all units held.
Indian standards allow only FIFO and weighted average. LIFO is not permitted under AS 2, Ind AS 2 or ICDS-II.
Raw materials, WIP, finished goods and stock at job workers all go into closing stock. See our closing stock guide for how to work it out.
Don't be the bottleneck. Become the AI-Run Factory.
See how TranZact keeps raw material, WIP, finished goods and job-work stock on one system. Bring your item list to the demo.




