Barcode Inventory: How It Works in a Factory (India)

6 min read

By

TranZact Solutions Team

· Published

Hero Background
Functions of ERP System Explained

What is barcode inventory?

Barcode inventory means giving every item, batch or bin a printed label. You scan that label each time stock moves, instead of writing it down by hand. Each scan updates the stock record in your inventory software, so counts stay correct without manual typing. In a factory, the main scan points are goods receipt, issue to production, finished goods entry and dispatch.

A barcode is not the same as a SKU. The SKU is your own item code, like RM-SS304-2MM. The barcode is that code printed in a form a scanner can read.

How barcode inventory works in a factory

Material moves through a plant in a fixed order. Put a scan at each step, and the stock record follows the material.

Goods receipt (GRN): scan material in against the PO

When a truck arrives, the stores person scans each label against the purchase order. Short or extra quantity is caught at the gate, not weeks later. Our GRN format guide lists the fields to capture.

Store and bin: scan into a bin or store location

Label every rack and bin, not just the items. At put-away, scan the bin label, then the item label. Now the record shows where stock sits, not only how much.

Issue to production: scan raw material out against the work order

This is where most hand entries go missing. Scan each issue against the work order, so consumption is recorded when it happens. Material sent for job work needs a scan when it leaves and when it returns.

Finished goods entry and dispatch: scan FG in, scan out on the invoice/challan

Scan finished goods into stock as they come off the line. At dispatch, scan each box against the invoice or delivery challan. A wrong item or count is caught before the truck leaves.

Stock counts: scan during cycle counts and audits instead of using paper sheets

Counters scan bin by bin instead of filling paper sheets. The count goes straight into the system for comparison. See our guides on cycle counting and stock audits.

Paper register vs barcode scan


Paper register

Barcode scan

Goods receipt

Written later from the challan

Scanned against the PO

Issue to production

Skipped when the floor is busy

Scanned against the work order

Bin location

Known only to the storekeeper

Bin label scanned at put-away

Stock count

Paper sheets, typed in later

Scanned bin by bin

What you need to start

  • Labels. Choose labels that survive oil, dust and handling. Paper labels tear and fade on a shop floor.

  • A label printer. Most setups use a thermal label printer.

  • A scanner or a phone. USB, handheld and Bluetooth scanners all work. A smartphone camera app can also scan, which suits a small start. Rugged scanners suit dusty shop floors.

  • Inventory software. It links each barcode to an item record and updates stock on every scan. Without it, a scan is just a number.

The software is the part that decides whether your counts are right. TranZact keeps that stock record. Its inventory module covers stock in, issue and bin cards across multiple stores.

Book a demo →

1D vs 2D (QR) barcodes

1D barcodes are the familiar black lines. They store an ID that points to a record in your software. 2D codes like QR and Data Matrix hold more data on a small label.

Point

1D barcode

2D (QR / Data Matrix)

Common types

UPC-A, EAN-13, Code 39, Code 128

QR, Data Matrix

What it holds

An ID that points to the item record

More data: batch number, serial number, expiry date

Label size

Needs a wider label

Fits small labels

Good fit in a factory

Bins, racks, plain raw material

Batch-tracked material, serialised finished goods

Many plants use both. Put 1D codes on bins and plain items, and QR codes on anything tracked by batch.

Do you need a GS1 barcode in India?

Only if your products sell through retail, or a customer asks for one. GS1-registered codes are the standard for retail. GS1 India handles barcode registration, GTIN validation and subscription renewal.

For stock that stays inside your plant, your own internal labels are enough. Raw material, bins and WIP can all use codes you create yourself.

How to set up barcode inventory in 8 steps

  1. Clean the item list. Remove duplicate codes, fix units, and give each item one code.

  2. Pick the code type. Use 1D for plain items and bins, QR for batches, GS1 only for retail.

  3. Generate codes. Create codes from your item list, or reuse supplier barcodes where they exist.

  4. Print labels. Test a few labels on the shop floor before you print thousands.

  5. Label items and bins. Name every rack and bin, then stick labels where a scanner can reach.

  6. Set up scanners and user rights. Decide who can scan receipts, issues and dispatches.

  7. Pilot one store. Run barcodes in one store first and fix what breaks.

  8. Train and roll out. Train each team member on their scan point, then extend store by store.

Common mistakes factories make

  • Skipped scans. When the floor gets busy, scans get skipped. One missed issue scan and system stock drifts from the bin again.

  • Unlabelled WIP and loose material. Half-made parts and loose bags fall out of the record. Label the trays or bins that hold WIP.

  • Duplicate item codes. The same bolt under two codes splits its stock across two records.

  • Labels that fade or tear. Oil, heat and handling ruin weak labels. Use tougher label stock and reprint damaged labels quickly.

Pros and cons of barcode inventory

Pros: fewer typing errors, faster receipts and counts, and stock that updates as material moves.

Cons: upfront cost for labels, printers and scanners, training time, and hardware problems like unreadable labels.

What to check in barcode inventory software
  • Each scan updates the item record

  • Bin cards and multi-store stock

  • Issues linked to work orders

  • Batch tracking for raw material

  • Clean sync with Tally or Busy

Barcodes need a clean stock record behind them: where TranZact fits

A scanner only reads a code. The stock record behind it decides whether the count is right. TranZact is manufacturing AI software that keeps that record for 10,000+ manufacturers.

The inventory module covers stock in, bin card, issue, batch tracking, multi-store, reorder and AI stock alerts. Purchase runs MRP report → indent → RFQ → PO → GRN → payment, so each GRN follows its PO.

Batch-wise stock tracking starts on the Scale+ plan. Batch Tracking & QC is on Dominate. Plans start at ₹8,333/month billed yearly for 4 users (see pricing). TranZact goes live in 2–3 weeks.

One honest limit: barcode scanning and label printing are not among TranZact's listed features. TranZact integrates with Tally, Busy, Zoho Books, Gmail and Excel / Google Sheets. Through API integrations, it connects with any other tool that offers an API, e.g. Salesforce or SAP. If you already run a barcode tool, check how it would connect before you buy.

Don't be the bottleneck

Don't be the bottleneck. Become the AI-Run Factory. Bring your item list and scan points to a demo, and see how the stock record works for your plant.

Book a demo →

Check out other blogs

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders