Breakdown Maintenance: Meaning, Types & Examples
6 min read
By
TranZact Solutions Team
· Published


Breakdown maintenance means you repair a machine only after it stops working. It is also called reactive or run-to-failure maintenance. It suits cheap, non-critical items like fans or bulbs. But on a critical machine such as a CNC or a press, it stops production. So most factories use it alongside preventive maintenance.
What is breakdown maintenance?
Breakdown maintenance is a repair you start only after a machine has failed. Nothing is done before the failure. The machine runs until it stops, and then the maintenance team steps in.
Picture a power press whose motor burns out mid-shift. The operator stops, the line behind him waits, and someone runs to the store for a spare motor. That scramble is breakdown maintenance.
It is common. IBM cites MaintainX data showing 38% of industrial maintenance teams use it as their main strategy.
Breakdown vs corrective maintenance
The two are close but not the same. Breakdown maintenance starts only after a failure. Corrective maintenance also covers faults found during a check and fixed before the machine stops.
Types of breakdown maintenance
Planned (run-to-failure): you choose to let a cheap, non-critical item run until it fails. A spare is ready, and the failure stops nothing important.
Unplanned (emergency): an important machine fails without warning. Production waits until it is repaired. This is the type that hurts.
How breakdown maintenance works, step by step
Report the stop. The operator tells the maintenance in-charge what happened and when.
Diagnose. Find the failed part and the likely cause.
Prioritise. If two machines are down, fix the one holding the most urgent order first.
Get the spare part. Issue it from the store, or buy it urgently through a purchase requisition.
Repair, test and restart. Run a trial piece before full production.
Record the cause. Note the part, the hours down and the reason.
Step 4 is where downtime hides. A short repair can stretch into days when the part has to be ordered from a vendor.
What a breakdown really costs your factory
Breakdown maintenance is costly because the repair bill is the smallest part. The real cost is everything that stops around the machine. Work it out in ₹ with this formula:
Breakdown cost = (output lost per hour × hours down) + idle labour wages + rush price and freight for parts + late-delivery penalties
Use the numbers from your last breakdown. Note how many hours went on waiting for the part, not on the repair itself.
For a global benchmark, an ABB survey cited by IBM puts unplanned downtime at USD 10,000 an hour at least. For some industrial companies it reaches USD 500,000 an hour.
Where TranZact helps when a machine breaks down
A breakdown hits more than the maintenance team. The store checks for the spare, purchase chases a vendor, and the planner reshuffles jobs. With Excel and WhatsApp, the owner ends up connecting all three.
TranZact is manufacturing AI software, used by 10,000+ manufacturers, that runs your operations from enquiry to dispatch. Here is how it handles the fallout:
Spares in stock: track critical spares with stock in, issue and bin cards across multiple stores. Set a reorder level, and AI stock alerts warn you when one runs low.
Buying the part: your team moves from indent to RFQ, PO and GRN in one purchase flow. Accounts sync one way to Tally, with no double entry.
Jobs on the stopped machine: work orders and process routing show which jobs were on that machine, so you can move them.
When a machine stops: before and after
Excel + WhatsApp | With TranZact | |
|---|---|---|
Is the spare in stock? | Call the store and wait | Bin card and multi-store stock |
Spare running low | Found out at breakdown | AI stock alert |
Buying the part | WhatsApp the vendor | Indent → RFQ → PO → GRN |
Jobs on the stopped machine | In the planner's head | Work orders to re-plan |
A clear limit: TranZact is not a maintenance-scheduling (CMMS) tool. It does not log breakdowns or schedule machine services. Plans start at ₹8,333 a month, billed yearly, and you go live in 2–3 weeks. See pricing.
Breakdown maintenance examples in an Indian factory
Breakdown maintenance does not work for every machine. It depends on what the machine does for your orders and your people.
Fine to run to failure
Bulbs and tube lights
Exhaust fans
Hand tools
A backup conveyor with a second line beside it
Never run to failure
CNC and VMC machines
Power presses
Injection moulding machines
Air compressors that feed the whole shop
Boilers and all safety equipment
When is breakdown maintenance OK?
Yes, breakdown maintenance is sometimes justified. Run each machine through four quick questions. If any answer is "no", put that machine on a preventive schedule.
Can this machine run to failure?
It doesn't stop any customer order
A backup or quick swap exists
It is not safety equipment
Replacing costs less than servicing
Advantages and disadvantages of breakdown maintenance
Advantages
Low upfront cost, with no schedule or routine checks.
You use each part for its full life before replacing it.
Disadvantages
Unplanned downtime that delays orders.
Emergency costs: rush parts, freight and overtime.
Safety risk when a machine fails under load.
Shorter machine life, as one failure can damage other parts.
Breakdown vs preventive vs predictive maintenance
Type | When you act | Best for | Main drawback |
|---|---|---|---|
Breakdown | After the machine fails | Cheap, non-critical items | Unplanned downtime |
Preventive | On a fixed schedule of hours or dates | Critical machines like presses and CNCs | Some parts replaced early |
Predictive | When readings like vibration or heat show wear | Costly machines where a stop hurts most | Needs sensors and data |
Most factories mix all three. Cheap items run to failure, critical machines get a schedule, and the costliest get monitored.
How to reduce breakdowns in your factory
List your critical machines. Mark every machine that stops a customer order when it stops.
Set preventive schedules. Follow the maker's service intervals for each critical machine.
Keep critical spares in stock. Set a reorder level and a minimum stock level for belts, bearings, seals and motors.
Record every breakdown. Write down the machine, part, hours down and cause.
Review repeat failures monthly. A machine that fails twice needs a preventive plan, not a third repair.
Then build service stops into your production plan. Leave some slack in capacity planning for your critical machines.
Plan around breakdowns, not after them
Machines will still fail. What you control is whether the spare is ready, the part is quick to buy and the jobs move on time. See how TranZact handles the spares, purchase and production plan around a breakdown.
Don't be the bottleneck. Become the AI-Run Factory.




