Material Management: Process & Steps for Manufacturers

6 min read

By

TranZact Solutions Team

· Published

Hero Background
Functions of ERP System Explained

Material management is how factories plan, buy, receive, store and issue material so production never stops and cash isn't stuck in extra stock. In practice it runs in seven steps. Plan what the orders need, raise an indent and buy against a purchase order. Check material in with a GRN, store it and issue it to production. Then track use and reconcile stock. The aim is the 5 R's: right material, right quantity, right price, right source, right time.

What material management means in a factory

In simple words, material management makes sure the right material is on the shop floor when a job needs it. It covers raw material, bought-out parts, consumables, packing material, work-in-progress and material with job workers.

Selling, dispatch and the accounts in Tally sit outside it.

The 5 R's of material management

Example: a fabrication unit that cuts steel sheet.

  • Right material: the grade and thickness the drawing asks for.

  • Right quantity: this month's orders plus scrap.

  • Right price: compared across two or three vendor quotes.

  • Right source: a vendor who delivers on time and passes inspection.

  • Right time: on the floor just before the job is due.

Material management vs inventory management

Inventory management is the stock-keeping part. Material management also covers planning and buying.

Point

Material management

Inventory management

Scope

Plan, buy, receive, store, issue, reconcile

Store, count, value, reorder

Starts from

Customer orders and the BOM

Material already in the store

Main question

What do we need, and when?

What do we have, and where?

The material management process, step by step

These seven steps are also the functions of material management. Each one leaves a document behind.

1. Plan what you need

Start from confirmed orders and the bill of materials (BOM). Multiply each order by its BOM, then subtract stock in hand and stock already ordered. The balance is your material requirement, which software calls MRP.

See our MRP software buying guide.

2. Raise an indent

An indent, or purchase requisition, is the internal request to buy. Stores or production raises it with the item, quantity and needed-by date. Purchase buys only against an approved indent.

3. Buy: RFQ, vendor choice, purchase order

Purchase sends a request for quotation (RFQ) to two or three vendors. It compares rate, delivery and payment terms. The chosen vendor gets a purchase order (PO) with price, quantity, tax and delivery date.

More in our procurement process guide.

4. Receive and check: GRN

When material arrives, stores checks it against the PO and the vendor's invoice. Items that need it go through incoming inspection. The goods receipt note (GRN) records what was accepted and what was rejected.

Use our GRN format.

5. Store: locations, bin cards, batches and levels

Give every item a fixed location and a bin card. Keep batches apart and issue the oldest first (FIFO). Set minimum, maximum and reorder levels so purchase knows when to act.

See our stock levels guide.

6. Issue to production

Issue material against a work order with a material issue slip, never on a verbal request. When material moves between stores or plants, record it on a material transfer note.

7. Track use, scrap and job-work material

Compare what was issued with what the BOM allows. The gap is scrap, wastage or a wrong entry. Track material sent to job workers until it comes back.

Count stock on a fixed cycle and match it to the register. See our material reconciliation guide.

The paper trail behind every unit of material
  1. Indent: what we need

  2. Purchase order: what we bought

  3. GRN: what actually arrived

  4. Issue slip: what went to production

  5. Stock count: what is left

How TranZact runs material management for a manufacturer

TranZact is manufacturing AI software used by 10,000+ manufacturers.

Plan: TranZact holds multi-level BOMs. The MRP engine runs through your orders and BOMs, then tells you what to buy and when. Planning (MRP + Indent) is in the Grow plan and above; see pricing.

Buy and receive: the purchase flow runs MRP report → indent → RFQ → PO → GRN → payment, plus vendor coordination. Your purchase person still raises each PO. See purchase management.

Store and issue: inventory covers stock in, bin card, issue, multi-store, reorder and AI stock alerts. Batch-wise stock tracking starts at Scale+, and quality control for raw material is on Dominate. See inventory management.

Production and job work: work orders, process routing, sub-contracting and production costing are built in. The e-way bill is generated from the GST invoice, with e-invoice (IRN) in the same flow, on all plans.

Accounts: accounting stays in Tally, and operations run in TranZact. It is a one-way sync with no double entry, and Busy and Zoho Books work too. See how the Tally integration works.

TranZact goes live in 2–3 weeks. Your data is stored in India on AWS servers in Mumbai.

Book a demo →

Material management for Indian factories: GST and Tally points

Three points matter in India.

  • E-way bills: material moving by road often needs one. See our e-way bill guide.

  • Job work: material sent to a job worker is still your stock and is reported on Form ITC-04. See ITC-04 and job-work tracking.

  • Tally: books in Tally drift away from a separate stores register.

What a materials manager does

In most small manufacturers, the materials manager is the stores in-charge, the purchase head, or both.

Daily: check shortages against today's work orders, follow up on open POs, make GRNs and issue material.

Monthly: count stock, review slow-moving and dead stock, check vendor delivery and rejections, and update reorder levels.

Objectives of material management and the numbers to watch

The objectives: no stoppage for want of material, lower stock value, fewer emergency buys and stock figures you can trust.

  • Stock-outs per month: how often a job waited for material.

  • Inventory turnover: material used in a year divided by average stock value. Higher means less cash tied up.

  • Stock accuracy after a count: the share of items where the register matched the shelf.

  • Material cost per unit: actual material cost per piece against the BOM.

6 signs your material management is breaking

  • Someone runs to a local dealer for urgent material most weeks.

  • The register says one number and the shelf shows another.

  • Dead stock sits in a corner and nobody has valued it.

  • Only the store keeper knows where things are.

  • Nobody can say how much material is lying with job workers.

  • Purchase learns what production needs from a WhatsApp message.

If three or more sound familiar, the fault is the system, not your team.

Excel or register vs software

Excel works for a few dozen items and one store. It breaks with multi-level BOMs, several stores or job work.

Register or Excel vs TranZact


Register or Excel

TranZact

What to buy

Worked out by hand

MRP report from orders and BOMs

Purchase trail

Sheets and WhatsApp messages

Indent, RFQ, PO, GRN on one system

Several stores

One sheet per store

Multi-store stock

Low stock

Noticed when it runs out

Reorder and AI stock alerts

Accounts

Re-typed into Tally

One-way sync to Tally

Don't be the bottleneck. Become the AI-Run Factory.

Bring your BOM and stock register to a demo. See the seven steps run for your items, stores and job workers.

Book a demo →

Check out other blogs

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders