Procurement: Meaning, Process & Steps for Manufacturers

6 min read

By

TranZact Solutions Team

· Published

Hero Background
Functions of ERP System Explained

What does procurement mean?

Procurement is the whole process a business uses to get the goods and services it needs from outside suppliers. It covers working out what is needed, choosing a vendor, agreeing price and terms, ordering, receiving and paying. Purchasing is one part of it, the act of placing the order. In a factory, procurement mostly means buying raw material and parts on time, in the right quantity, so production never stops.

Example: a fabrication unit wins an order for steel frames. Procurement is everything from checking how much MS sheet it needs to paying the steel supplier.

Procurement vs purchasing: what's the difference?

Procurement is the full cycle. Purchasing is the ordering step inside it.

Point

Procurement

Purchasing

Scope

Need, vendor, terms, order, receipt, payment

Raising and sending the purchase order

Starts with

A material need from orders or stock

An approved indent

Ends with

Supplier paid and books updated

PO accepted by the vendor

Focus

Right material, price and timing over time

Placing this one order correctly

Types of procurement

Direct vs indirect procurement

Direct procurement is buying what goes into your product. For a fabricator, that is MS sheet and fasteners. For a plastics unit, it is resin granules and masterbatch.

Indirect procurement is buying what keeps the factory running but never ends up in the product. Think machine spares, cutting oil and gloves.

Direct buying must follow production plans. Indirect buying needs budgets and approvals.

Goods vs services

Goods are physical items like raw material and tools. Services include job work, transport and machine maintenance.

The procurement process in a factory: 7 steps

One example runs through every step: a fabrication order needing 2,000 kg of MS sheet. The numbers are illustrative.

1. Work out what you need

Start from confirmed orders and the BOM. Subtract stock in hand and stock on order. Here: 2,000 kg needed, 500 kg in stores, none on order. So you buy 1,500 kg.

See our procurement planning guide.

2. Raise and approve an indent

Stores or production raise an indent, an internal request to buy. A supervisor or the owner approves it. Here, it asks for 1,500 kg by a set date.

3. Ask vendors for quotes (RFQ)

Send a request for quotation to two or three approved vendors. State grade, thickness, quantity and delivery date.

4. Compare quotes and agree terms

Compare rate, delivery time, payment terms and freight. Check what you paid last time. Pick the vendor who can deliver the right grade on time.

5. Issue the PO

The purchase order fixes item, quantity, rate, taxes, delivery date and payment terms. Use these purchase order formats to start.

6. Receive and check material (GRN)

At the gate, stores check the material against the PO. The goods receipt note records accepted and rejected quantity: here, 1,480 kg and 20 kg. Use this GRN format.

7. Match the invoice to PO and GRN, then pay

Match the supplier's invoice to the PO rate and GRN quantity. Pay only for the 1,480 kg accepted. Then the entry goes into Tally.

How TranZact runs procurement for a manufacturer

TranZact is manufacturing AI software used by 10,000+ manufacturers. Its purchase flow runs MRP report → indent → RFQ → PO → GRN → payment.

The MRP engine runs through your orders and BOMs, then tells you what to buy and when. Vendor coordination is part of the same flow.

On the stock side, inventory includes reorder levels and AI stock alerts. See the full flow on the purchase management page.

Accounting stays in Tally. Operations run in TranZact, with one-way sync and no double entry. Busy and Zoho Books sync too. Read how the TranZact–Tally integration works.

The honest limits: TranZact does not replace your accounting software. There is no free plan. Plans start with Grow at ₹8,333/month billed yearly, as listed on pricing. TranZact goes live in 2–3 weeks.

Book a demo →

Procure-to-pay: how the documents flow

Procure-to-pay (P2P) is the document trail behind the seven steps.

Indent → RFQ → quotation → PO → GRN → invoice → payment

The key control is three-way matching. The PO says what you agreed to buy, the GRN what arrived, the invoice what the supplier charges. Pay only when all three agree.

Check before you pay a supplier invoice
  • Rate matches the PO

  • Quantity matches the GRN

  • Rejected quantity is deducted

  • GSTIN and tax amounts are correct

  • Due date follows agreed terms

Where procurement goes wrong in small factories

These problems start when buying runs on WhatsApp, calls and Excel. That patchwork depends on someone remembering every step.

  • Late orders. Nobody spots the shortage until production is about to stop.

  • Over-buying. Without a stock number people trust, they buy extra "just in case".

  • No record of the last rate. The rate sits in an old chat, so you can't negotiate.

  • WhatsApp orders with no PO. When the bill arrives, there is nothing to check it against.

  • GRN not matching the PO. Short or wrong material gets accepted and paid in full.

  • Purchase not linked to production. Buying works from a list, not from orders and the BOM.

For day-to-day buying, see our purchase management guide.

Patchwork buying vs a clear indent-to-payment flow


WhatsApp and Excel

Indent-to-payment flow

Shortage spotted

When production stops

From orders, BOM and stock

Approval

Verbal, over the phone

Recorded on the indent

Last rate

Lost in old chats

On past POs

Supplier bill

Paid on trust

Matched to PO and GRN

Procurement software: what to look for

Procurement software comes in three kinds.

  • Purchase module in an ERP. Buying sits inside a wider business system.

  • Standalone eProcurement suite. Built for sourcing and tenders, mostly in large companies.

  • Manufacturing software with MRP linked to purchase. Buying starts from orders and BOMs, so it fits factories.

Our guide to eProcurement software for manufacturers goes further. Check for:

  • MRP that works from your orders and BOM

  • Indents with approvals

  • RFQs and quote comparison

  • POs, and a GRN against each PO

  • Vendor history: past rates and deliveries

  • GST-ready documents

  • Tally sync with no double entry

For the MRP part, see our MRP software buying guide.

Public procurement and tenders in India

Central government buying follows the General Financial Rules (GFR) 2017. Rule 149 makes GeM (Government e-Marketplace) the channel for common-use goods and services.

Value limits have changed across amendments. Check the current GFR and GeM text before you bid.

You may also see the "five pillars of public procurement". South Africa's National Treasury lists them as value for money, open and effective competition, ethics and fair dealing, accountability and reporting, and equity. Lists differ by country.

Don't be the bottleneck. Become the AI-Run Factory.

If your buying still runs on WhatsApp and memory, see what an indent-to-payment flow looks like for your own factory.

Book a demo →

Check out other blogs

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders