Three Way Matching: PO, GRN & Invoice Check Explained
6 min read
By
TranZact Solutions Team
· Published


Three way matching is a check before you pay a supplier. You compare the purchase order (what you ordered), the goods receipt note or GRN (what arrived) and the supplier's invoice (what you are billed). You pay only when all three agree on item, quantity and price, or the gap is within a limit you have set. If they don't agree, the invoice is held until purchase, stores or the supplier sorts it out.
What is three way matching?
Three matching, or 3 way matching, means three documents must tell the same story before money leaves your account. Each one is made by a different person. That is what makes the check work.
Document | Who makes it in a factory | What it proves |
|---|---|---|
Purchase order (PO) | Purchase team member | What you ordered, and at what rate |
Goods receipt note (GRN) | Stores team member at inward | What arrived and was accepted |
Supplier invoice | Supplier | What you are being billed |
For the fields each document should carry, see our guides to the purchase order, the GRN format and the purchase invoice format.
How to do three way matching, step by step
Issue the PO. Purchase sends the supplier a PO with item, quantity, rate, tax and delivery date.
Record the GRN. Stores counts and checks the goods. The GRN records what was accepted, rejected or short.
Receive the invoice. The supplier's bill should quote your PO number.
Compare line by line. Accounts checks the three documents against each other, using the checklist below.
Pay or hold. If all three agree, or the gap is within your limit, release payment. If not, hold the bill and send it back to purchase.
The order matters. Accounts should not book or pay a bill before the GRN exists.
What to tick before you pay a supplier
PO number quoted on the invoice
Item and description match the PO
Billed qty within GRN accepted qty
Rate matches the PO rate
GST rate and amount are correct
Bill not already booked or paid
A worked example from a factory
This example is illustrative. The numbers are made up to show how the check works.
A fabrication unit orders 500 kg of MS sheet at ₹70/kg. Stores weighs the delivery and accepts 480 kg, so 20 kg is short. The supplier's invoice bills the full 500 kg at ₹72/kg.
Check | PO | GRN | Invoice |
|---|---|---|---|
Quantity | 500 kg | 480 kg accepted | 500 kg |
Rate | ₹70/kg | — | ₹72/kg |
Value before GST | ₹35,000 | ₹33,600 at PO rate | ₹36,000 |
There are two mismatches. The bill is 20 kg over what was received, and the rate is ₹2/kg above the PO.
You pay for 480 kg at ₹70, which is ₹33,600 plus GST. Ask the supplier for a revised invoice or a credit note for the ₹2,400 gap. If purchase confirms the new rate was agreed, pay 480 kg at ₹72 instead.
What to do when the three don't match
Mismatch | What you see | What to do |
|---|---|---|
Short quantity | Invoice qty above GRN accepted qty | Pay for accepted qty; ask for a credit note |
Rejected at inward | GRN shows goods rejected | Return them; pay only for accepted goods |
Rate above PO | Invoice rate higher than PO rate | Hold until purchase confirms or supplier revises |
Wrong tax | GST rate or amount differs | Ask the supplier to correct the invoice |
Wrong or missing PO number | Bill can't be traced to an order | Send to purchase to identify the order |
Duplicate invoice | Same bill number already booked | Reject it; don't pay twice |
Missing GRN | Bill arrived, no GRN in stores | Don't pay until stores confirms receipt |
For short or rejected goods, a purchase return keeps the stock and the payable in line.
A tolerance limit is a small gap, in percent or rupees, that you decide to pay without a second look.
2-way vs 3-way vs 4-way matching: which to use
2-way matching in accounts payable checks only the PO against the invoice, with no GRN. 4-way adds an inspection report.
Method | Documents checked | Best for | What it catches |
|---|---|---|---|
2-way | PO + invoice | Services, low-risk buys | Wrong rate or total |
3-way | PO + GRN + invoice | Raw material, parts, any physical goods | Short supply, overbilling, duplicate bills |
4-way | PO + GRN + inspection report + invoice | Pharma and quality-sensitive buys | Goods received but failing inspection |
For most manufacturers buying raw material and parts, 3-way is the right default. If you need the inspection step, TranZact's Dominate plan includes quality control for raw material and finished goods (Batch Tracking & QC). See plans and pricing.
Why three way matching matters
You stop paying for goods that came short or never arrived. The GRN is your proof.
Duplicate bills stand out. A second bill against the same GRN gets caught before payment.
Fraud gets harder. When three people each own one document, no single person can order, receive and pay.
Audits get easier. Every payment traces back to an order and a receipt.
Supplier disputes shrink. You discuss a dated GRN, not someone's memory.
Three way matching and GST input tax credit
The GRN matters for GST too. Section 16(2)(b) of the CGST Act allows input tax credit only if you have received the goods or services.
When goods arrive in lots, the first proviso to Section 16(2) says credit is taken on receipt of the last lot. Your GRNs record what arrived and when.
A bill booked before the GRN exists can lead to credit claimed on goods you don't have yet. Check the exact treatment with your CA.
Doing it with paper GRNs, Excel and Tally: where it breaks
Many manufacturers run this check by hand. Stores writes GRNs in a paper register, purchase keeps POs in Excel, and accounts books bills in Tally. None of these is linked.
The stores register doesn't point to the PO, so accounts can't tell which order a delivery belongs to.
The bill gets booked before stores confirms receipt, because the supplier is chasing payment.
A short supply noted on paper never reaches accounts.
Month-end turns into a line-by-line cross-check of three sources.
The fault isn't the team. These tools were never built to connect the PO, the GRN and the bill.
Paper and Tally vs one purchase flow
Paper GRN + Excel + Tally | TranZact purchase flow | |
|---|---|---|
PO to GRN | Linked by hand | PO, GRN, payment in one flow |
Invoice to PO | Checked line by line | Invoices match automatically to POs |
Bill in Tally | Typed again by accounts | One-way sync, no double entry |
Stock records | Register updated later | Stock in and bin card |
How TranZact keeps the PO, GRN and payment in one flow
TranZact is manufacturing AI software used by 10,000+ manufacturers. Its purchase flow runs MRP report → indent → RFQ → PO → GRN → payment, in one flow.
Supplier invoices match automatically to the POs they belong to, instead of someone cross-checking by hand.
On the inventory side, stock in, bin card, issue, multi-store, reorder and AI stock alerts are built in. Approvals & alerts are included from the Grow plan.
Here is the honest limit. TranZact does not replace your accounting software. Accounting stays in Tally, with a one-way Tally integration and no double entry. It also syncs with Busy and Zoho Books. The call on a short supply or a rate change stays with your team. TranZact is live in 2–3 weeks.
Want to see the purchase flow on your own items? Don't be the bottleneck. Become the AI-Run Factory.




