Kaizen: Meaning, 5 Principles & Steps in a Factory

6 min read

By

TranZact Solutions Team

· Published

Hero Background
Functions of ERP System Explained

Kaizen is a Japanese word that means "improvement" or "change for the better". In a factory it means continuous improvement: small, regular changes made by everyone, from owner to machine operator. The goal is to cut waste and raise quality and output. Teams usually run kaizen through the Plan-Do-Check-Act (PDCA) cycle. It is a core part of lean manufacturing and the Toyota Production System.

What does kaizen mean?

Kaizen (改善) is read as "change for the better". Masaaki Imai, who took the idea worldwide, defined it as "continuing improvement involving everyone".

Outside Japan, kaizen means continuous improvement. Japanese dictionaries simply say "improvement", without the word "continuous".

Kaizen meaning in Hindi

A plain Hindi translation of continuous improvement is निरंतर सुधार (nirantar sudhar). This is a translation. The original term is Japanese.

Where kaizen came from

The Training Within Industry (TWI) programme was installed in Japan in 1951. Its film "Improvement in Four Steps" introduced kaizen there. Kaizen later became part of The Toyota Way.

Imai's 1986 book, Kaizen: The Key to Japan's Competitive Success, made the word known around the world.

The 5 principles of kaizen

The Kaizen Institute lists five principles. Here is what each one looks like on a shop floor.

  • Know your customer: find out what buyers value, like on-time dispatch or zero rejections. Improve that first.

  • Let it flow: cut waiting, extra stock and back-and-forth trips between machines and stores.

  • Go to gemba: gemba is where the work happens. Walk the shop floor instead of judging from the office.

  • Empower people: give operators clear goals and the freedom to fix small problems themselves.

  • Be transparent: put the numbers where everyone can see them, so the team knows if a change worked.

How kaizen works: the PDCA cycle

Kaizen runs in a loop called PDCA, also known as the Shewhart or Deming cycle. You test one small change, measure it, and keep it only if it works.

Taiichi Ohno of Toyota put it simply: "There can be no kaizen without a standard". Once a change works, write it down as the new standard way. The next kaizen starts from there.

The kaizen loop on one machine
  1. Plan: measure today, pick one change

  2. Do: try it on one machine

  3. Check: compare after with before

  4. Act: keep it or rethink it

  5. Standardise: write the new way down

Kaizen steps: the 8-step method (and why lists say 5, 7 or 12)

Lean.org lists eight steps for a kaizen:

  1. Background: why this problem matters

  2. Current-state definition

  3. Current-state analysis

  4. Goals

  5. Target condition

  6. Implementation plan

  7. Check results

  8. Follow-up and standardisation

A kaizen event is often shown in five steps. Set goals, review the current state and plan, implement, review results, then report follow-ups.

There is no single official count. Lists of 5, 7, 10 or 12 steps or principles describe the same loop in more or less detail. Pick one and use it every time.

Daily kaizen vs kaizen event (kaizen blitz)

Daily kaizen is small fixes any team member makes on any day. A kaizen event, also called a kaizen blitz, puts a small team on one problem for about five days.

Type

Size of change

Time

Watch out for

Daily kaizen

Small fixes by anyone

Any day, ongoing

Gains lost because nobody writes the new standard

Kaizen event (blitz)

One bigger problem, small team

About five days

Counting events instead of results; leaving out frontline workers

Both types only count if you can show a result. That needs a before number and an after number.

Where TranZact fits: the numbers kaizen needs

First, the limit. TranZact has no kaizen board, suggestion scheme or kaizen-event module.

What it gives you is the operating data to set a baseline and check results. TranZact is manufacturing AI software used by 10,000+ manufacturers.

What your kaizen needs

What TranZact gives you

A stock baseline

Inventory ageing and valuation, bin card, multi-store

Production cost before and after

Production costing and work orders

Material that flows on time

MRP report → indent → RFQ → PO → GRN, reorder, AI stock alerts

The steps a job goes through

Process routing and multi-level BOM

Defects traced by batch

Batch Tracking & QC (Dominate plan)

Numbers everyone can see

65+ reports, AI tasks and dashboards, approvals and alerts

The MRP engine runs through your orders and BOMs, then tells you what to buy and when. For waste like dead stock, start from inventory ageing and valuation. Production costing shows whether a change cut your production costs.

Accounts stay in Tally, Busy or Zoho Books, with one-way sync and no double entry. TranZact goes live in 2–3 weeks. Plan details are on the pricing page.

Book a demo →

Kaizen example in an Indian factory

The numbers below are illustrative, not from a real customer. Take an auto-parts unit with one CNC machine that changes over four times a day.

Before: each setup takes 40 minutes. The operator spends much of it hunting for tools and inserts in a shared cupboard.

Root cause: tools have no fixed place, and nobody prepares the next job's kit.

Change: the team fixes a shadow board at the machine. A helper lays out the next job's tools before each changeover.

After: setup drops to 25 minutes. Four changeovers a day free up 60 minutes of machine time.

New standard: a kit checklist is filled before every changeover. Track the gain in your cycle time. If this machine is a bottleneck, recheck your line balancing too.

Simple kaizen sheet format

Keep one sheet per kaizen, on paper or in Excel. Fill it before and after the change.

What goes on a kaizen sheet
  • Problem and root cause

  • Before number

  • Change made

  • After number and saving

  • Owner and date

Is kaizen lean or Six Sigma?

Kaizen is a lean method. It comes from the Toyota Production System, like kanban and just-in-time manufacturing.

Six Sigma is a separate method, and the two can run side by side. For the bigger picture, read traditional vs lean manufacturing.

Kaizen and 5S

Kaizen and 5S are often used together. 5S sets up a clean, ordered workplace, and kaizen keeps improving the work done there. The shadow board in the example above is a 5S-style change.

Government support: the MSME Competitive (LEAN) Scheme

The Ministry of MSME launched the MSME Competitive (LEAN) Scheme on 10 March 2023, with QCI and NPC. It helps MSMEs adopt lean methods such as kaizen.

  • Who can apply: any MSME registered on the Udyam portal.

  • Levels: Basic, Intermediate and Advanced.

  • Basic: implementation support is free.

  • Intermediate and Advanced: government assistance of up to ₹1.08 lakh and ₹2.16 lakh. You pay 10% of the implementation cost.

  • Extra support: women, SC/ST, NER and cluster MSMEs get an extra 5%.

Terms can change, so check the current terms on lean.msme.gov.in before you apply.

Start with one process

Don't be the bottleneck. Become the AI-Run Factory. Bring one process you want to improve, and we'll show you the numbers TranZact would track for it.

Book a demo →

Check out other blogs

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders