Production Order: Meaning, Steps & Format for Factories
6 min read
By
TranZact Solutions Team
· Published


A production order is an instruction inside a factory to make a set quantity of one product by a set date. It names the product, the quantity, the due date, the bill of materials (BOM) to use and the routing steps to follow. It is usually raised after a sales order or a planning run. The shop floor books material issued, output and scrap against its number.
What is a production order?
A production order turns demand into a job the shop floor can run. It says what to make, how many, by when, and from which materials.
It goes by other names: work order, manufacturing order, shop order or job ticket. Most Indian factories say "work order" or "job card". TranZact calls it a work order too.
What a production order contains
A complete production order has two halves. The top half is the plan. The bottom half fills up as work happens.
Order number and date: the reference every issue and output entry uses.
Product and BOM version: the item to make and the bill of material revision to build from.
Quantity and UOM: how many, in Nos, kg or litres.
Start and due date: when work begins and when goods must be ready.
Materials: each BOM line multiplied by the order quantity.
Routing steps: the operations in order, with a machine or work centre for each. See our guide to routing in manufacturing.
Linked sales order and status: the customer order it serves, and where the order stands today.
Actuals: material issued, good output and scrap, booked as work happens.
Sample production order format
Here is an order for 200 units of the 0.5 HP water pump from our BOM guide. The numbers are illustrative, not from a real factory.
Field | Entry |
|---|---|
Order number | PRD-0142 |
Product | Water pump, 0.5 HP (BOM rev. 3) |
Quantity | 200 Nos |
Start / due date | 2 Dec 2026 / 12 Dec 2026 |
Linked sales order | SO-0388 |
Routing | Casing painting → pump assembly → testing → packing |
Status | Released |
Material | Per pump | For 200 pumps | UOM |
|---|---|---|---|
Motor assembly | 1 | 200 | Nos |
Pump casing | 1 | 200 | Nos |
Impeller | 1 | 200 | Nos |
Mechanical seal | 1 | 200 | Nos |
Hex bolt M6 | 8 | 1,600 | Nos |
Primer paint | 0.05 | 10 | litre |
Carton box | 1 | 200 | Nos |
The motor assembly is a sub-assembly. It often gets its own production order, which must finish first.
How a production order works: 6 steps
Demand arrives. A sales order comes in, or the stock plan shows a product running low.
Check the BOM against stock. Any shortfall goes to purchase as an indent or PO. This is the job of material requirement planning.
Create the order. Fix the product, BOM version, quantity and due date.
Release it to the floor. Release only once material and machine capacity are confirmed.
Issue material and record work. Stores issues material against the order number. Each routing step records output and scrap. Goods between steps are work in process (WIP).
Complete and close. Finished goods go into stock and the order closes. Actual cost is then compared with planned cost.
Check before you release an order
Latest BOM version attached
All material in stock or ordered
Machines and operators are free
Due date matches the sales order
Routing steps listed
Where production orders break on paper and Excel
A register or WhatsApp message works for a few orders a week. It breaks once orders start to share materials and machines.
Orders on WhatsApp. The supervisor gets a message, and nobody else sees the order.
Shortfalls found mid-run. Bearings run out on day three, because nobody checked stock against all open orders.
No record of issues. Stores hands out material without an order number, so stock stops matching.
Unknown WIP. Nobody can say how many pumps sit half-built between steps.
Cost known at month end. By then, the next batch has already run at the same loss.
None of this is the team's fault. A register was never built to connect orders, stock and purchase.
Register or Excel vs TranZact
Register or Excel | TranZact | |
|---|---|---|
BOM | Copied across sheets | Multi-level BOM |
Buy list | Worked out by hand | MRP report: what to buy, when |
Job work | Tracked on WhatsApp | Sub-contracting |
Order cost | Known at month end | Production costing |
Accounts | Re-typed into Tally | One-way sync to Tally |
How TranZact handles production orders
TranZact is manufacturing AI software, trusted by 10,000+ manufacturers. Its production module covers multi-level BOM, work orders, process routing, sub-contracting and production costing.
Planning sits on top. The MRP engine runs through your orders and BOMs, then tells you what to buy and when. The purchase flow runs MRP report → indent → RFQ → PO → GRN → payment.
Inventory adds stock in, issue, multi-store, reorder and AI stock alerts. Accounting stays in Tally. Operations run in TranZact, with a one-way sync and no double entry.
Production and MRP are in Grow and every plan above. Live in 2–3 weeks.
Two honest limits. TranZact is not a CAD or PLM tool, so design stays in your drawing software. Machine planning is only in the Dominate plan.
Production order statuses
Every order moves through a set of statuses. Each one controls what the team can do next.
Status | What it means | What it allows |
|---|---|---|
Planned / Created | Drafted, not yet on the floor | Edit quantity, dates and BOM |
Released | Approved for the shop floor | Issue material, start work |
In progress | Work has started | Book output and scrap |
Completed | Full quantity made | Move finished goods to stock |
Closed | Costs settled | Viewing only |
Cancelled | Order dropped | Return issued material to stores |
Names differ by software. Some systems add statuses like Simulated or Firm Planned. The idea is the same.
Production order vs work order vs planned order vs sales order vs purchase order
Order | What it is | Raised by | Goes to |
|---|---|---|---|
Production order | Instruction to make a set quantity | Production or planning | Shop floor and stores |
Work order | Same thing, in most Indian factories | Production | Shop floor |
Planned order | A suggestion from planning, not yet approved | Planner or MRP run | Planner, for review |
Sales order | Customer's confirmed order | Sales | Production and dispatch |
Purchase order | Order to a supplier for material | Purchase | Supplier |
The names get mixed up because each software picks its own. For the buying side, see our purchase order guide.
Questions people ask about production orders
What is the difference between a production order and a work order?
In most Indian factories, there is none: both mean an instruction to make a set quantity.
Who creates a production order?
Usually the production planner or production head. In smaller factories, the owner often raises it once a sales order is confirmed.
What is the difference between a planned order and a production order?
A planned order is a planning-run suggestion that becomes a production order once someone approves it.
What is the difference between a production order and a purchase order?
A production order is internal and tells your shop floor what to make. A purchase order goes to a supplier to buy material.
See a production order run in TranZact
Bring one real product to the call. We'll show its BOM, work order and MRP report. Don't be the bottleneck. Become the AI-Run Factory.




