Quality Management System (QMS): Steps for Factories
6 min read
By
TranZact Solutions Team
· Published


A quality management system (QMS) is the set of written rules, checks and records a factory uses so every batch meets the customer's specification. It says who checks what at each stage: raw material, in-process and finished goods. It also says what happens to rejected material and how problems get fixed so they don't come back. Most factories build their QMS on ISO 9001, the international standard, whose new 2026 edition was published on 16 September 2026.
What is a quality management system?
In plain words, a QMS is how your factory makes sure good parts go out and bad parts don't. It covers people, checks and records, not just the final inspection.
Wikipedia's formal definition is "a collection of business processes focused on consistently meeting customer requirements and enhancing their satisfaction". Quality management is the work of planning, checking and improving quality across the whole business.
What a QMS looks like in an Indian factory
Take an auto-parts maker that machines shafts for a car company. Raw material is checked at the GRN, before it enters stock. Wrong grade or size? It goes on hold, not on the shelf.
On the floor, operators check parts against the work order and routing at set stages. Each reading is noted against the batch. Before dispatch, finished goods get a final check against the customer's drawing.
Rejected parts are held, reworked or scrapped. If a supplier's lot failed, the supplier hears about it with the batch details. For how to run each check, see our guide to quality inspection.
A factory QMS at a glance
Raw material check at the GRN
In-process check against the work order
Final check before dispatch
Hold, rework or scrap rejected parts
Tell the supplier, with batch details
Record every check against the batch
The 7 principles of quality management
ISO 9001 rests on seven principles. Here they are in factory terms.
Customer focus: make exactly what the customer's drawing and spec ask for.
Leadership: the owner sets the quality goal and backs it.
Engagement of people: operators and checkers know the standard and own it.
Process approach: run purchase, production and dispatch as linked steps, not islands.
Improvement: fix the cause of each defect, not just the part.
Evidence-based decision making: decide from inspection records, not memory.
Relationship management: work with suppliers so their lots arrive right.
The elements of a QMS
You may see "9 elements" or "10 elements". Lists differ. Wikipedia names these:
Quality objectives and a quality manual
Structure and responsibilities
Data management
Processes, including purchasing
Product quality
Continuous improvement
Document control
Employee training
Supplier quality management
How to set up a QMS in 7 steps
Step 1: Write your quality policy and objectives
Keep the policy to one page. Set objectives you can measure, like the rejection rate at final inspection.
Step 2: Map your processes from purchase to dispatch
Draw the flow: PO, GRN, issue to production, work order, final check and dispatch. Mark each point where a check is needed.
Step 3: Write specs and checklists for each stage
For each item, list what to check, how to check it and the accept limit. Use the customer's drawing as the base.
Step 4: Assign checkers and train them
Name who checks at each stage. Train them on the checklist and the gauges they use.
Step 5: Record every inspection against the batch
Each result should carry the batch number, date and checker. That is what lets you trace a defect back to a supplier lot. See how batch tracking makes this possible.
Step 6: Handle rejections with CAPA
CAPA means corrective and preventive action. Fix the cause, then change the process so the defect can't repeat.
Step 7: Review and run internal audits
Review rejection data every month with your team members. Run internal audits to check that the system is followed.
Steps 5 and 6 break down when records sit in registers. In TranZact, quality control for raw material and finished goods sits in the same system as your GRNs and batches. It comes with Batch Tracking & QC on the Dominate plan.
Benefits of a QMS for a small manufacturer
Less rework and scrap
The same output, batch after batch
Traceability to the batch and supplier
Fewer customer complaints
Readiness for customer and ISO audits
Access to customers and tenders that ask for ISO 9001
What to check in software for quality
Raw material QC at the GRN
Finished goods QC before dispatch
Batch tracking to trace defects
QC in the same system as stock
Tally sync with no double entry
Which plan includes QC
ISO 9001 certification in India: what changes in 2026
ISO 9001 certification is voluntary. A third-party certification body audits your QMS and issues the certificate.
In India, pick a body accredited by NABCB, a constituent board of the Quality Council of India. BIS lists IS/ISO 9001 as its QMS standard. A certificate is valid for three years, then must be renewed.
ISO 9001:2026 was published on 16 September 2026. It adds focus on resilience, climate change, quality culture, ethical behaviour and opportunity-based thinking.
A three-year transition is planned. ISO 9001:2015 certificates are expected to stay valid until 30 September 2029, subject to accreditation confirmation. Ask your certification body which edition to plan for.
QMS vs TQM vs QA and QC
A QMS is the whole system. QA (quality assurance) prevents defects through the process. QC (quality control) finds defects through checks.
TQM (total quality management) is a wider way of working where everyone owns quality. What are the 5 pillars of TQM? No single official list exists, and sources name different ones. For the difference between the two kinds of check, read QA vs QC.
Paper and Excel vs a QMS inside your factory software
Many small factories run quality on paper registers and Excel. It works until a customer asks which supplier lot went into a failed part.
What you need | Paper and Excel | QC inside factory software |
|---|---|---|
Raw material check | Gate register, apart from stock records | Recorded with the GRN |
Trace a defect | Search old registers by date | Look up the batch and supplier |
Rejected stock | Noted in a separate sheet | Kept with the stock it belongs to |
Dispatch check | Signed slip, often filled later | Logged before dispatch |
Audit records | Spread across files and phones | In one system, by GRN, batch and work order |
Comparing tools? Our quality control software buying guide lists what to check.
How TranZact handles quality for a manufacturer
TranZact is manufacturing AI software used by 10,000+ manufacturers. It runs purchase, inventory and production in one place.
The purchase flow runs MRP report, indent, RFQ, PO, GRN and payment. Production covers multi-level BOM, work orders, process routing, sub-contracting and production costing.
The Dominate plan adds Batch Tracking & QC, with quality control for raw material and finished goods. Your QC records then live in the same system as GRNs, batches and work orders.
Accounting stays in Tally, Busy or Zoho Books, with one-way sync and no double entry. Data is stored in India on AWS servers in Mumbai. TranZact is live in 2–3 weeks.
Two limits to know. QC is not in the Grow or Scale+ plans; Dominate is ₹30,000/month billed yearly for 12 users. TranZact also does not issue ISO 9001 certificates; only an accredited certification body can. See every plan on the pricing page.
A QMS works when every check is recorded where the work happens. See quality control next to your GRNs, batches and work orders in a short demo.
Don't be the bottleneck. Become the AI-Run Factory.




