Inventory Valuation: Methods & How to Do It (India)

6 min read

By

TranZact Solutions Team

· Published

Hero Background
Functions of ERP System Explained

Inventory valuation is the rupee value you put on the stock you have not sold yet: raw material, work in progress and finished goods. In India, AS 2 and Ind AS 2 say stock is valued at cost or net realisable value, whichever is lower. Cost is worked out with FIFO, weighted average or, for unique items, specific identification; LIFO is not allowed.

What inventory valuation means for a factory

A manufacturer holds four kinds of stock: raw material, work in progress (WIP), finished goods, and stores and spares.

Higher closing stock means a lower cost of goods sold, so profit goes up. Overvalue it and you show profit you never made.

The same figure goes on your balance sheet and into the stock statement your bank asks for. If you have a tax audit, the report states the valuation method you used.

The rule in India: lower of cost and net realisable value

AS 2 applies to most MSMEs and unlisted companies. Ind AS 2 applies to listed and other companies that must follow Ind AS. On valuation, both say the same.

Net realisable value (NRV) is the expected selling price minus the cost to finish the item and sell it.

Closing stock is never valued at market price when that is higher than cost. If NRV falls below cost, value the item at NRV and write the stock down now.

What counts in the cost of inventory

Purchase cost

This is the price paid plus freight inward, handling, import duty and taxes you cannot claim back. Take off trade discounts. GST you claim as input credit stays out.

Conversion cost

For WIP and finished goods, add direct labour and production overheads. Spread fixed overheads, like factory rent and machine depreciation, over normal capacity, not actual output.

Costs you must leave out

  • Abnormal wastage of material, labour or overheads

  • Selling and distribution costs

  • Fixed overheads left unabsorbed in a low-output month

Why factory stock valuations go wrong

The rule and the cost lines are rarely the problem. The quantities are.

  • Out-of-date records. Stock sits in an Excel sheet updated weekly, so the count and the books never agree. That gap is a stock discrepancy.

  • Issues not recorded. Material goes to the floor on a paper slip and never reaches the system. Raw material looks higher than it is.

  • Guessed WIP. Without job-wise records, WIP becomes a round number at year end.

  • No ageing. Dead stock stays at full cost because nobody sees how old it is.

  • Many Excel copies. Stores, purchase and accounts each keep a sheet, and each shows a different total.

Excel and paper were never built to capture every stock movement as it happens.

Valuing stock: Excel and paper vs TranZact


Excel and paper

TranZact

Stock quantity

Updated when someone remembers

Live by item and store

Issues to production

Paper slips

Issue entries in the system

Old stock

Hidden in the sheet

Inventory ageing report

Production cost

Worked out by hand

Production costing

Accounts

Typed again in Tally

One-way sync to Tally

Where TranZact does this for a manufacturer

TranZact is manufacturing AI software used by 10,000+ manufacturers.

  • Live stock by item and store. Stock in, issue, bin card and multi-store in inventory management.

  • Paper to system. A photo of a paper entry becomes a system entry, with no typing.

  • Inventory Ageing & Valuation. On the Grow plan, so old and slow stock is visible before you value it.

  • Production costing. With multi-step BOM and production, also on Grow, for WIP and finished goods cost.

  • Batch-wise stock tracking. On Scale+, for manufacturers who track stock by lot.

  • Accounts stay in Tally. One-way sync to Tally, Busy or Zoho Books, with no double entry. See how TranZact works with Tally.

One honest limit. TranZact keeps stock, ageing and production cost live, so valuation starts from correct quantities. The cost formula and the final book entry stay with your accountant in Tally.

Book a demo →

Inventory valuation methods allowed in India

AS 2 allows three cost formulas. Use the same one for similar items.

FIFO

First in, first out. Issues are costed at the oldest price, so closing stock sits at recent prices.

Weighted average cost

Divide the total cost of units on hand by the number of units. Each new receipt updates the weighted average.

Specific identification

Each item carries its own actual cost. Use it for one-off items, like a custom machine or a special die.

Why LIFO is not allowed

Last in, first out costs issues at the newest price, leaving old prices in closing stock. AS 2 and Ind AS 2 do not allow it.

Standard cost (only if close to actual)

Standard cost is not a fourth formula. AS 2 allows it as a shortcut to measure cost, only if the result stays close to actual cost.

Method

Allowed in India?

Fits best when

FIFO

Yes

Stock has a shelf life or batch dates

Weighted average

Yes

Bulk material mixed in one bin

Specific identification

Yes, for unique items

Made-to-order or one-off items

Standard cost (shortcut, not a formula)

Only if close to actual cost

Repeat products with stable costs

LIFO

No

Not an option

How to value inventory step by step (with an example)

  1. Count stock by item and store, and match your records.

  2. Pick one cost formula per group of similar items.

  3. Work out cost per unit, as shown below.

  4. Take the lower of cost and NRV.

  5. Total RM, WIP and FG separately.

Raw material

Say you bought steel rod twice this month and issued 120 kg after both lots arrived. These figures are illustrative.

  • 1 April: 100 kg at ₹60 = ₹6,000

  • 15 April: 100 kg at ₹70 = ₹7,000

  • Issued: 120 kg. Closing stock: 80 kg

FIFO: the 120 kg issued come from the ₹60 lot first. The 80 kg left are all from the ₹70 lot, so closing stock is ₹5,600.

Weighted average: ₹13,000 ÷ 200 kg = ₹65 per kg. Closing stock is 80 × ₹65 = ₹5,200.

Same steel, same count, ₹400 apart. When prices rise, FIFO gives the higher closing value.

Work in progress

WIP carries the material issued, plus labour and overheads up to the stage it has reached. A part that has cleared cutting and welding, but not painting, carries those two stages only.

Finished goods

Finished goods carry full material, labour and overheads at normal capacity. Then check NRV. Say 50 brackets cost ₹200 each, or ₹10,000 in total.

The selling price has dropped to ₹190, and selling costs are ₹10 per bracket. NRV is ₹180, below cost. Value them at 50 × ₹180 = ₹9,000 and write down ₹1,000.

Before you sign off closing stock
  • Physical count matches stock records

  • One cost formula per item group

  • Overheads at normal capacity only

  • Every item checked against NRV

  • Old stock reviewed for write-down

  • RM, WIP and FG shown separately

Which method should a manufacturer use?

Use the table above to match the method to how your stock moves. Once you pick, stay consistent for similar items. Change only if the new method gives more reliable information, and disclose the change. Agree the choice with your CA before year end.

Get a stock number you can trust

If your closing stock is still a year-end guess, see how TranZact keeps your stock live.

Don't be the bottleneck. Become the AI-Run Factory.

Book a demo →

Check out other blogs

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders