Production Process: Steps, Types & Example for Factories
6 min read
By
TranZact Solutions Team
· Published


A production process is the set of steps a factory follows to turn raw materials, labour and machine time into finished goods. In most factories it runs in five steps. You plan what to make, set the route through machines and schedule the work. Then you release work orders and material to the shop floor, and track output against the plan. The four main types are job, batch, mass and continuous production.
What is a production process?
A production process turns inputs into something a customer will pay for. It has three parts: input, process and output.
Input: raw materials, bought-out parts, labour, machine time and power.
Process: the work done on the inputs, such as cutting, moulding, mixing or assembly.
Output: finished goods, plus scrap and by-products that also need counting.
Our guide to manufacturing vs production explains how the two words differ.
The 5 steps of the production process
These five steps make up production planning and control. Here is each one, and where it slips in a small unit.
1. Planning
Decide what to make, how much and by when. This starts from sales orders and the bill of materials (BOM). It slips when the BOM lives in one person's head.
2. Routing
Set the machines and operations each job goes through, in order (see routing in manufacturing). It slips when the route changes on the floor and nobody records it.
3. Scheduling
Fix when each operation runs on each machine. It slips when rush orders jump the queue and the plan is never updated.
4. Releasing work orders
Issue the work order or job card, and issue material from the store against it. Textbooks call this "dispatching". It slips when material leaves without an issue slip, so stock stops matching.
5. Follow-up and control
Compare actual output with the plan and fix the gaps. It slips when output sits in a register and reaches the owner days later.
The 7-step version textbooks use
Many courses teach seven steps instead. It is a teaching list, not a standard:
Product design
Material planning and buying
Production planning
Routing
Scheduling
Production on the shop floor
Inspection and follow-up
Production process flow chart
Copy this flow for a typical Indian manufacturer. Skip job work if you do everything in-house.
Sales order received
BOM check
Purchase planning with MRP for what is short
Raw material issued from the store
Work order or job card released
Operations run as per the route
Job work at a vendor, if any
Quality check
Finished goods entered into stock
Dispatch with GST invoice, and e-way bill if needed
Where TranZact runs the production process
TranZact is manufacturing AI software used by 10,000+ manufacturers. AI runs your entire operations from enquiry to dispatch, and your team manages it. Here is how the flow maps:
Planning: multi-level BOM. The MRP engine runs through your orders and BOMs, then tells you what to buy and when.
Purchase: MRP report → indent → RFQ → PO → GRN.
Routing and release: process routing, work orders and material issue.
Job work: sub-contracting.
Stock and cost: stock in, multi-store, reorder, AI stock alerts and production costing.
Dispatch: TranZact generates the e-way bill from the GST invoice, with e-invoice (IRN) in the same flow.
Your shop-floor registers can stay. TranZact's AI reads a photo of a paper entry and turns it into a system entry, with no typing. Supplier invoices match to POs automatically.
Your books stay in Tally. Operations run in TranZact, with a one-way sync to Tally and no double entry. TranZact also syncs with Busy and Zoho Books.
Know the limits. TranZact is not an accounting package. Machine planning and quality control are on the Dominate plan. Multi-step BOM, routing, sub-contracting and production costing start from the Grow plan. See plans and pricing and the production management page.
4 types of production process
The type depends on how many units you make and how much each order varies.
Job production: one-off or small custom orders. Example: an engineering unit building a special-purpose machine.
Batch production: a set quantity made together. Example: plastic moulding runs or pharma batches.
Mass production: large volumes of one standard product on a dedicated line. Example: a packaging unit making standard cartons.
Continuous production: the plant runs non-stop as material flows through. Example: chemical plants and some food processing lines.
Job and batch production are called intermittent, because work stops and starts. Mass and continuous production fall on the continuous side.
Intermittent vs continuous production
Intermittent (job, batch) | Continuous (mass, continuous) | |
|---|---|---|
Volume per order | Low to medium | High |
Product variety | High | Low |
Machine changeovers | Frequent | Rare |
Main planning job | Scheduling each order | Keeping the line fed |
What is batch production?
Batch production makes a fixed quantity of one product, then switches the machine to the next product. Each batch can be tracked as one unit, which helps with expiry and recalls. See our guide to batch production vs mass production.
Example: production process in an Indian fabrication unit
Take a small fabrication unit with an order for 200 MS brackets (an example quantity). Here is each step and its document.
Indent: the BOM shows MS sheet is short, so an indent is raised.
Purchase order: a PO goes to the steel supplier.
GRN: the store checks the sheet on arrival and makes a goods receipt note.
Material issue: sheet goes to cutting against an issue slip.
Work order or job card: brackets move through cutting, bending and welding, logged on the job card.
Job-work challan: welded brackets go to a powder-coating vendor on a delivery challan, then come back, with an e-way bill if needed.
FG entry: after a final check, the brackets enter finished-goods stock.
GST invoice and e-way bill: the invoice is raised, plus an e-way bill if needed. Then the goods leave.
Our subcontracting guide covers job-work challans and stock held at the vendor. In many units, these eight documents sit in a register, Excel, WhatsApp and Tally.
How to track the production process
Most manufacturers track production in one of four ways.
Method | Good for | Where it breaks |
|---|---|---|
Paper registers | A few jobs a day | Data reaches the owner late, with no link to stock |
Excel | Plans and simple reports | Keeping up as orders grow |
Tally | Accounts, GST and invoices | Production is not its job |
Production software | BOMs, work orders, stock and costing in one place | Fails when it is too hard for the shop floor to use |
Whatever you use, measure the same few things every day. Our guide to production costs shows how to build up cost per unit.
What to measure in your production process
Output against plan, by work order
Work in progress at each step
Material consumed vs the BOM
Cost per good unit
Become the AI-Run Factory
Your production process should not depend on you chasing every job card. See TranZact run your production process. Don't be the bottleneck. Become the AI-Run Factory.




