Six Sigma: Meaning, DMAIC & Formula for Factories

6 min read

By

TranZact Solutions Team

· Published

Hero Background
Functions of ERP System Explained

Six Sigma is a data-driven method for cutting defects and variation in a process. A process at Six Sigma level makes no more than 3.4 defects per million opportunities, which is 99.99966% defect-free. Teams improve an existing process in five steps called DMAIC: Define, Measure, Analyse, Improve and Control.

What does Six Sigma mean?

Sigma (σ) is the symbol for standard deviation, a measure of spread. Six Sigma means six standard deviations fit between the process average and the nearest specification limit. The tighter the spread, the fewer parts fall outside the limit.

Bill Smith introduced Six Sigma at Motorola in 1986. Jack Welch made it central at GE in 1995. The method is now set out in the standard ISO 13053:2011.

Six Sigma fixes the process so fewer bad parts get made, rather than catching them later. Our guide to QA vs QC explains that difference.

What 3.4 defects per million really means

3.4 defects per million opportunities equals a 99.99966% yield. The figure allows for processes drifting about 1.5 sigma over time. Not every process needs six sigma; each one needs a target that fits its cost and risk.

The Six Sigma formula (DPMO and sigma level)

The Six Sigma formula is DPMO, or defects per million opportunities:

DPMO = defects ÷ (units × opportunities per unit) × 1,000,000

A defect is anything that fails the customer's specification. An opportunity is each separate thing you check that could fail, such as one dimension on a drawing.

Sigma level table

Sigma level

DPMO

Yield

1

691,462

30.9%

2

308,538

69.1%

3

66,807

93.3%

4

6,210

99.38%

5

233

99.977%

6

3.4

99.99966%

Like most Six Sigma tables, this one includes the 1.5 sigma shift.

Worked factory example

This example is illustrative. A machine shop makes 1,000 parts and checks 5 dimensions on each. That gives 5,000 opportunities. Inspection finds 25 defects.

DPMO = 25 ÷ (1,000 × 5) × 1,000,000 = 5,000. That sits between 4 sigma (6,210) and 5 sigma (233), just above 4 sigma. The yield is 99.5%.

The result is only as good as the counts behind it. Accurate counts start with consistent quality inspection.

DMAIC: the 5 stages of Six Sigma

DMAIC is the five-stage method Six Sigma teams use to improve an existing process. Here it runs on one example: rejections on a CNC-turned shaft at an Indian auto-parts unit.

Define. Write the problem in one line: shafts rejected for oversize diameter. Note the customer's specification, what rejections cost and who is on the team.

Measure. Count units made and defects per batch, by machine and shift. First check that the gauge gives the same reading twice. This is your baseline.

Analyse. Find the root cause. Compare defects by machine, operator, tool life and raw material batch. A fishbone diagram helps list every possible cause.

Improve. Test one fix on a small run, such as a shorter tool-change interval. Keep it only if defects drop against the baseline.

Control. Lock in the gain. Update the work instruction, put a control chart at the machine and review the numbers every month.

DMADV for new products

DMADV (Define, Measure, Analyse, Design, Verify) is also called Design for Six Sigma. Use DMAIC to fix a process that exists and DMADV to design a new one.

DMAIC on one CNC rejection problem
  1. Define: one part, one defect

  2. Measure: defects per batch and shift

  3. Analyse: find the root cause

  4. Improve: test one fix

  5. Control: chart it, review monthly

Where TranZact fits: the data a Six Sigma project needs

First, the limit. TranZact is not a statistics or SPC tool. It doesn't draw control charts or calculate sigma levels; use Excel or a statistics package for that.

What a project needs most is clean operating data. TranZact's manufacturing AI software keeps sales, purchase, inventory, production and planning on one system. 10,000+ manufacturers use it.

DMAIC stage

Data you need

Where TranZact records it

Define

Cost of rework and scrap

Production costing

Measure

Units made, defects by batch

Work orders; batch-wise stock tracking (Scale+); Batch Tracking & QC (Dominate)

Analyse

Steps, machines, supplier lots

Process routing; machine planning (Dominate); GRN for each delivery

Improve

Changes to materials or steps

Multi-level BOM; process routing

Control

Ongoing tracking

65+ reports; approvals & alerts; real-time MIS (Dominate)

Quality control for raw material and finished goods is on the Dominate plan; see pricing for each plan. TranZact integrates with Excel and Google Sheets, so you can run the statistics there.

Clean batch tracking is the base for most defect analysis. Comparing tools? Our quality control software buying guide lists what to check.

Book a demo →

Six Sigma principles

Most guides list six principles. Each one has a plain meaning on the shop floor.

  • Focus on the customer. The customer's specification decides what counts as a defect.

  • Use data and facts. Decide from defect counts, not the loudest opinion in the room.

  • Improve the process. Fix the step that makes bad parts, not just the parts.

  • Act early. Watch the trend instead of reacting to each customer complaint.

  • Work across teams. Purchase, stores and production team members own the problem together.

  • Aim for perfection, accept small failures. Some fixes won't work, and that is part of the method.

Six Sigma belts and roles

  • White Belt: knows the basic ideas and terms.

  • Yellow Belt: joins projects and helps collect data.

  • Green Belt: leads small projects alongside a regular job.

  • Black Belt: leads larger projects full time and coaches Green Belts.

  • Master Black Belt: trains Black Belts and guides the whole programme.

  • Champion: a senior leader who picks projects and clears roadblocks.

India has many White Belt and Green Belt course providers. An owner-led factory can start with one person trained to Green Belt level.

Six Sigma vs Lean vs Kaizen

Six Sigma cuts variation. Lean cuts waste. Kaizen makes small improvements every day. Lean Six Sigma combines the first two, removing waste and variation in the same project.


Six Sigma

Lean

Kaizen

Goal

Fewer defects, less variation

Less waste and waiting

Small, steady improvement

Method

DMAIC projects led by data

Map the flow, remove waste

Everyone suggests and tests small fixes

Tools

SPC, FMEA, DOE, control charts

Value stream map, 5S, kanban

PDCA, 5S, suggestion schemes

Size of change

Medium to large, one project at a time

Process-wide

Small and continuous

Best for

Repeat defects you can measure

Long lead times, excess stock

Building a daily improvement habit

For more, read our guides to kaizen and traditional vs lean manufacturing.

Common Six Sigma tools and honest limits

The common tools are statistical process control (SPC), control charts, process mapping, FMEA and DOE. Many factories also track OEE next to defect rates.

Six Sigma has critics. Joseph Juran called it "a basic version of quality improvement". Some statisticians call the 1.5 sigma shift arbitrary. In 2010 the Wall Street Journal reported on how often Six Sigma projects fail.

One lesson holds either way. Without clean data, a project has no baseline to prove a gain.

Ready for your first Six Sigma project?
  • One problem that keeps repeating

  • A written definition of the defect

  • Defect counts by part and batch

  • Units made in the same period

  • Cost of rework and scrap

  • One person trained to Green Belt

Start with one process

Pick the one rejection that costs you most. Count it, run DMAIC and prove the gain with numbers. TranZact goes live in 2–3 weeks, so your baseline data can start soon.

Don't be the bottleneck. Become the AI-Run Factory.

Book a demo →

Check out other blogs

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders