Engineer to Order (ETO): Meaning, Process & Examples
6 min read
By
TranZact Solutions Team
· Published


Engineer to order (ETO) means a product is designed for one customer and built only after that customer places the order. Each order gets its own drawings and its own bill of materials (BOM), so engineering time comes before purchase and production can start. Custom machines, process plants, conveyors and special-purpose equipment are typical ETO products.
What is engineer to order (ETO)?
In ETO, the full spec is not known when the order comes in. The customer brings a need, such as an output, a size or a site layout. Your engineers turn that need into a design.
Because design comes first, ETO has the longest lead time of any build method. Purchase starts only once the design and BOM are final. You hold little finished stock, but every order runs like a small project.
Engineer to order examples
Engineering products are usually ETO when each customer needs something different. Common examples among Indian manufacturers:
Special-purpose machines built for one customer's part or process
Process plants and skids designed for one site
Conveyors and material-handling systems sized to a shop layout
Fabricated structures, tanks and pressure vessels built to a drawing
Control panels built to a customer's spec
Moulds, dies and fixtures made for one product
Many makers also take near-repeat jobs: a past design changed for a new size or capacity. That is still ETO, with less design work.
How the engineer to order process works, step by step
Enquiry. The customer shares the need: output, size, site details and delivery date.
Estimate and quotation. You cost the job, often from the actual cost of similar past jobs. Then you send the quotation.
Order and advance. The customer confirms, usually with an advance payment.
Design and BOM. Engineers make the drawings. The order then gets its own bill of materials and routing.
Purchase planning. MRP works out what to buy and when. Then come the indent, RFQ, purchase order and GRN.
Production and job work. Parts are made in-house or sent out for job work, such as machining or painting. Then the product is assembled.
Inspection and dispatch. The product is checked, then shipped with a GST invoice and e-way bill.
Payments and cost check. Milestone payments come in. Compare the actual cost with the quote before you price the next job.
ETO vs MTO vs ATO vs MTS
Make to order builds an existing design after the order; engineer to order creates the design after the order. That one difference changes lead time, costing and purchase planning.
Here is how the four build methods compare in plain terms.
Method | Design | When you buy and build | Example |
|---|---|---|---|
Make to stock (MTS) | Fixed, standard | Before the order, to a forecast | Standard fasteners |
Assemble to order (ATO) | Fixed modules the customer picks | Parts in stock; assembly after the order | A pump set built from stocked parts |
Make to order (MTO) | Existing design | Material and build after the order | A catalogue machine built on order |
Engineer to order (ETO) | New or changed design per order | Design first, then buy and build | A conveyor line for one plant |
MTS builds before anyone orders. ATO and MTO wait for the order but reuse a known design. Read more in our guide to assemble to order.
What is an ETO engineer?
An ETO engineer is the design or application engineer who turns a customer's need into drawings and the order's BOM. They often help with the quotation too. They stay involved through production, because questions and changes come up on the shop floor.
Where engineer to order breaks in a small factory
Most owner-led manufacturers run ETO on Excel, WhatsApp and Tally. The work gets done, but the links between steps break. Common gaps:
The quote is costed from memory or an old Excel sheet.
The BOM changes after the order, but purchase still works from the old list.
Long-lead parts are ordered late, so the whole order waits.
Material sent for job work is tracked on paper challans and gets hard to trace.
Actual cost is never compared with the quote.
Every bill is typed again into Tally.
None of this is the team's fault. These tools were never built to hold one order together from quote to dispatch. Here is the same order run on one system.
One custom order: patchwork vs TranZact
Excel + WhatsApp | TranZact | |
|---|---|---|
Quote | Old Excel sheet | Quotation and order timeline |
BOM | Drawing list on email | Multi-level BOM |
Purchase | Bought from memory | MRP report to indent and PO |
Job work | Paper challans | Sub-contracting |
Cost | Rarely checked | Production costing |
Dispatch | Re-typed into Tally | E-way bill from GST invoice |
What to check in software for engineer to order
There is no single best ERP for every manufacturer. For ETO, check these before you buy:
A quotation that becomes the order, without retyping
A multi-level BOM for each order
Process routing for each order's operations
MRP that runs from the order and BOM to indent and purchase order
Sub-contracting to track job work material
Production costing, to compare actual cost with the quote
Item variants for near-repeat designs
Sync with Tally, Busy or Zoho Books
GST e-invoice and e-way bill from the invoice
For a wider shortlist, see our guide to the best manufacturing ERP in India. You can also compare BOM software options.
TranZact at a glance
10,000+ manufacturers use TranZact
2–3 weeks to go live
Within 1 hour first chat reply, 10:00–19:00 Mon–Sat
How TranZact runs engineer to order for a manufacturer
TranZact is manufacturing AI software used by 10,000+ manufacturers. It runs a custom order once the design is ready. Here is how each ETO step maps to it:
Quote and order: enquiry, quotation and order timeline.
Design to shop floor: multi-level BOM, work orders and process routing in production management.
Purchase: the MRP engine runs through your orders and BOMs, then tells you what to buy and when. The flow runs MRP report, indent, RFQ, PO and GRN.
Job work: sub-contracting.
Cost: production costing.
Dispatch: TranZact generates the e-way bill from the GST invoice, with e-invoice (IRN) in the same flow.
Accounts: accounting stays in Tally and operations run in TranZact. One-way sync means no double entry. Busy and Zoho Books work too.
Stock sits in inventory management, with stock in, issue, reorder and AI stock alerts. The Grow plan includes multi-step BOM, routing, sub-contracting, production costing, and MRP with indent. Item variants for near-repeat designs are on Dominate. See pricing.
The honest limit: TranZact is not a design tool. It does not include CAD, a product configurator or project milestone billing. Keep design in your CAD software and let TranZact run the order from there. It goes live in 2–3 weeks.
See one custom order run from quote to dispatch
Bring a recent custom order to the demo. We will walk it through quotation, BOM, purchase, job work, cost and dispatch with you.
Don't be the bottleneck. Become the AI-Run Factory.




