Standard Costing: Meaning, Formula & Example (India)

6 min read

By

TranZact Solutions Team

· Published

Hero Background
Functions of ERP System Explained

Standard costing is a cost method where a factory fixes, before production, what one unit should cost in material, labour and overhead. After the batch is made, actual cost is compared with this standard. The gap is called a variance, and it shows where money leaked: the price paid, the material used, the labour hours or the overheads.

This guide gives the formulas, a worked ₹ example and the data your system must hold to make it work.

What is standard costing?

Standard costs are the planned "should cost" of one unit. You set one for direct material, one for direct labour and one for overhead. Stock and cost of goods sold are first recorded at standard. Any difference from actual is recorded as a variance.

Standard costing suits manufacturers who make the same products again and again. For one-off jobs, job costing is usually a better fit. Continuous-flow plants often use process costing.

Standard cost formula

Standard cost per unit = standard material + standard labour + standard overhead.

  • Standard material = standard quantity × standard price

  • Standard labour = standard hours × standard labour rate

  • Standard overhead = standard hours × overhead rate

Average cost per unit

Average cost per unit = total production cost ÷ units produced. It is worked out after production, from actual figures. Standard cost per unit is set before production, as a target.

How to set standard costs in your factory

  1. Material quantity: take it from the bill of materials, plus normal scrap.

  2. Material price: use recent purchase rates, not last year's.

  3. Labour: multiply hours per unit from your routing by the labour rate.

  4. Overhead rate: divide expected yearly overhead by expected yearly labour or machine hours.

  5. Review: update standards when input prices or methods change.

Types of standards

An ideal standard assumes no waste and no lost time. It is rarely met, so most variances come out adverse. An attainable standard allows for normal scrap and normal lost time.

Ind AS 2 says standards should reflect normal levels of materials, labour, efficiency and capacity. It also expects them to be reviewed regularly. For most MSMEs, attainable standards are the right choice.

Ideal vs attainable standards


Ideal standard

Attainable standard

Scrap allowed

None

Normal scrap

Lost time allowed

None

Normal lost time

How often met

Rarely

Often, with good control

Variances

Mostly adverse

Point to real leaks

Where standard costing breaks in a small factory

The method is simple. The data behind it is the hard part. The patchwork of Excel, WhatsApp and Tally was never built to hold that data together.

  • The BOM on file is older than the one used on the floor.

  • Material issued to the floor is not recorded per order.

  • Routing hours are never captured.

  • Purchase rates sit in Excel sheets and WhatsApp chats.

  • Accounts and production live apart, so variances surface months late.

How TranZact helps you run standard costing

TranZact is manufacturing AI software used by 10,000+ manufacturers. It keeps the inputs standard costing needs in one place. These include multi-level BOM, process routing, work orders, stock issue and production costing.

Standard costing data: patchwork vs TranZact


Patchwork

TranZact

BOM

Excel file, often outdated

Multi-level BOM

Process hours

Not captured

Process routing

Purchase rates

Excel and WhatsApp

From PO and GRN

Material issue

Not recorded per order

Stock issue recorded

Product cost

Worked out much later

Production costing

Accounts

Re-typed into Tally

One-way sync, no double entry

Purchase runs from indent to RFQ, PO and GRN, so purchase rates sit in the same system. Accounting stays in Tally, Busy or Zoho Books, with one-way sync and no double entry. Here is how the Tally integration works.

Production costing, multi-level BOM and process routing are on all current plans. Check pricing for plan details, or see the production features. You can go live in 2–3 weeks.

One honest limit: the variance accounting itself is done by your accountant, in your books. TranZact holds the BOM, purchase and production cost data they start from.

Book a demo →

Variance analysis: the variances to read every month

Total variance = standard cost − actual cost. If actual is lower, the variance is favourable (F). If actual is higher, it is adverse (A). Then split it into parts so you know the cause.

Material price variance

(Standard price − actual price) × actual quantity. It shows whether purchase paid more or less than planned.

Material usage variance

(Standard quantity for good output − actual quantity) × standard price. Extra scrap, rework or loose issue to the floor shows up here.

Labour rate variance

(Standard rate − actual rate) × actual hours. Overtime or a higher-paid operator shows up here.

Labour efficiency variance

(Standard hours for good output − actual hours) × standard rate. Breakdowns, long setups and slow work show up here.

Overhead variances

Overhead is split into spending and efficiency, or budget and volume. Spending shows whether overheads cost more than planned. Volume shows whether output fell short of the level the overhead rate assumed.

Always read the parts together. Cheaper material can give a favourable price variance but an adverse usage variance.

Worked example: 1,000 steel brackets (illustrative ₹)

The numbers below are illustrative. Standard cost for one bracket:

  • Steel: 2 kg × ₹60 = ₹120

  • Labour: 0.5 hr × ₹200 = ₹100

  • Overhead: 0.5 hr × ₹160 = ₹80

That is ₹300 per unit, or ₹3,00,000 for 1,000 brackets. The actual batch used 2,100 kg of steel bought at ₹58, costing ₹1,21,800. It took 520 labour hours at ₹210, costing ₹1,09,200.

Variance

Working

Result

Material price

(60 − 58) × 2,100

₹4,200 F

Material usage

(2,000 − 2,100) × 60

₹6,000 A

Net material

₹1,20,000 − ₹1,21,800

₹1,800 A

Labour rate

(200 − 210) × 520

₹5,200 A

Labour efficiency

(500 − 520) × 200

₹4,000 A

Net labour

₹1,00,000 − ₹1,09,200

₹9,200 A

Purchase saved ₹2 a kg, but the floor used 100 kg more steel than the BOM allows. So the owner asks two questions. Why the extra 100 kg of steel? And why 20 extra hours, at a higher rate? Overhead is left out to keep the example short.

Standard costing vs estimated costing

A standard is a carefully set "should cost" for a repeat product. It is used to control cost and measure variances. An estimate is a projected "will cost", often for a quotation or a one-off job. It is not used for variance accounting.

Is standard cost the same as FIFO?

No. FIFO and weighted average value stock at actual purchase cost. Standard cost is a pre-set rate. Ind AS 2 allows the standard cost method only if the results come close to actual cost. LIFO is not allowed. Our guide to inventory valuation covers each method.

What are the four types of cost?

Costs are commonly grouped as direct, indirect, fixed and variable. Direct costs like material and labour tie to one product. Indirect costs like factory rent are shared across products. Standard costing sets standards for direct material, direct labour and overhead.

Advantages and limitations of standard costing

Advantages

  • A clear yardstick for budgeting

  • Management by exception: you look only at the big variances

  • Cost-saving targets your team members can work towards

  • Simpler bookkeeping, since stock moves at one rate

Limitations

  • Works best for repeat, uniform output

  • Built for stable conditions, so fast price swings make standards stale

  • Can treat current performance as good enough

See what your products really cost

Do your standards live in one file and your actuals in three others? A demo shows TranZact's production costing on your kind of product.

Don't be the bottleneck. Become the AI-Run Factory.

Book a demo →

Check out other blogs

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders

Hero Background
Become the
AI-Run Factory

Born in India. Building for the world.

Built by IIT & IIM founders